Abstract:Materials with high barrier properties against oxygen are required for the packaging of many sensitive foods. Since commodity polymers lack these properties, additional barrier materials are used in plastic-based barrier packaging. These are usually more expensive than commodity polymers and, in higher fractions, also make recycling more difficult. Current developments, therefore, aim at barrier layers that are as thin as possible but retain the barrier properties. One approach is to incorporate nanoparticles into these layers. In this study, the barrier properties of nanocomposite coatings, consisting of unmodified polyvinyl alcohol (PVA), and dispersed stick-shaped halloysite (Hal) or platelet-shaped montmorillonite (MMT) silicate nanoparticles, were investigated. The PVA was dissolved in aqueous nanoparticle dispersions, which were prepared by mechanical shearing, to produce the so-called “nanolacquer.” Nanolacquers with nanoparticle concentrations of 7, 30, and 47 vol% with respect to PVA were applied in a single process step with k -bar on a polypropylene substrate film. The integration of 30 vol% platelet-shaped MMT enhances the barrier performance in comparison to pure PVA by a factor of 12 and 17 for oxygen and helium, respectively. Scanning electron microscopy (SEM) shows a homogeneous distribution and a parallel alignment of the nanoparticles within the coated layer. An increase in the crystallinity of PVA was observed due to the nanoparticle integration as demonstrated by x -ray diffraction (XRD) measurements. The investigation by Fourier transform infrared (FTIR) spectroscopy and the activation energy of the permeation coefficient indicate an interaction between the nanoparticles and the PVA. The theoretically calculated values for barrier enhancement accord well with the experimental values, which emphasizes that the gas barrier improvement for oxygen and helium is mainly dominated by the tortuous path effect.

Hybrid organic-inorganic coating with enhanced oxygen- and UV-barrier performance: Polyelectrolyte complex based on sodium alginate, poly (vinyl alcohol), and reconstructed layered double hydroxide

Polyacrylate Decorating Poly(ethylene terephthalate) (PET) Film Surface for Boosting Oxygen Barrier Property

Study the Factors Affecting Water Vapor Barrier Properties of Organic–inorganic Hybrid Coatings

Transparent and flame-retardant hybrid protective coating with high surface hardness, yet foldability

Polyethylene Terephthalate Composite Films with Enhanced Flame Retardancy and Gas Barrier Properties via Self-Assembly Nanocoating

Rational design of vapor‐deposited self‐crosslinking polymer for transparent flexible oxygen barrier coatings

Oxygen Barrier Property of Synthesized Polyacrylate Coatings Containing Inter‐chain Cross‐linking Architecture on PET Film

Poly(vinyl alcohol)/reduced graphene oxide multilayered coatings: The effect of filler content on gas barrier and surface resistivity properties

Transparent and Super-Gas-barrier PET Film with Surface Coated by a Polyelectrolyte and Borax

Development of Biodegradable Polyamide 4/polyvinyl Alcohol/Poly(lactic Acid) Multilayer Films with Tunable Water Barrier Property and Superior Oxygen Barrier Property

Preparation and Properties of High Hardness Ultraviolet Curable Polyethylene Terephthalates Surface Coatings Modified with Octavinyl-Polyhedral Oligomeric Silsesquioxane

Nano-Brick Wall Architectures Account For Super Oxygen Barrier Pet Film By Quadlayer Assembly Of Polyelectrolytes And Alpha-Zrp Nanoplatelets

Modification of Poly(ethylene furandicarboxylate) with Aliphatic Polycarbonate diols: 1. Randomnized Copolymers with Significantly Improved Ductility and High CO2 Barrier Performance

High gas barrier coating using non-toxic nanosheet dispersions for flexible food packaging film

A Chitosan Derivative/phytic Acid Polyelectrolyte Complex Endowing Polyvinyl Alcohol Film with High Barrier, Flame-Retardant, and Antibacterial Effects.

Nanocomposite Coatings Based on Polyvinyl Alcohol and Montmorillonite for High-Barrier Food Packaging

Gas-Barrier Hybrid Coatings by the Assembly of Novel Poly(vinyl alcohol) and Reduced Graphene Oxide Layers through Cross-Linking with Zirconium Adducts.

Preparation of UV-LED Curable Antifouling and Flame Retardant Superhydrophobic Coatings for Polyethylene Terephthalate Surface Protection

Preparation and characterization of high barrier coating of citric acid crosslinked polyvinyl alcohol and nano-SiO2

High oxygen barrier property of polyethylene composite films with bilayer polyvinyl alcohol coating for emergency foods in high‐humidity environments

Robust and Flexible Transparent Protective Film Fabricated with an Ambient-Curable Hybrid Resin