Abstract:Structure-acoustic coupled systems have received great attention in engineering, and a typical representative is a plate coupled with a cavity. The sound in the cavity is excited by the vibration of the plate and when there is strong coupling between the acoustic modes of the cavity and the vibrational modes of the plate, the sound pressure can be enhanced dramatically. In this paper, active control based on the pole placement method is used for the first time to reduce the noise in a plate-cavity coupled system. The principle of the pole assignment is that the poles of a system represent the system's dynamical behaviour, and their assignment allows one to modify the response of the system using sensors and actuators. In this work, the usage of pole assignment to modify the dynamics of the plate is theoretically derived, and the resulting sound in the cavity is analytically calculated by solving a coupled matrix equation. To access the performance of the pole placement method in reducing the noise in the coupled system, three example cases are considered. The first is a local control case which uses a single actuator to control the first two modes of the plate in order to attenuate the resulting sound in the cavity. The second case is imposing global control by using two actuators to modify the first four modes of the plate, weakening the strong interaction between the pate and the cavity by shifting their natural frequencies away from each other. The third is applying uncontrollability conditions to retain particular modes when the control method is applied. The analytical results show that the pole placement method can be effective to control both the vibration and the vibro-acoustics in the plate-cavity coupled system. The finite element (FE) method is used to validate the analytical models. The FE predictions show good agreement with the analytical results. The pole placement method is shown to be effective in controlling the noise in this plate-cavity coupled system, and there is the potential to extend the method to more complex structure-acoustic coupled systems.

Sound reduction of a panel-cavity system with a chaotically vibrating boundary

Vibro-Acoustics Characteristics of Non-Uniform Ring Stiffened Cylindrical Shells Using Wave Propagation Approach

Study of the Partially Open Cavity's Resonant Character

Acoustic modeling and eigenanalysis of the coupled cavities with panels

Sound Transmission Through Simply Supported Finite Double-Panel Partitions with Enclosed Air Cavity

Vibroacoustic behavior of clamp mounted double-panel partition with enclosure air cavity

Performance of a Planar Virtual Sound Barrier at the Baffled Opening of a Rectangular Cavity.

Modeling and Analysis for Sound Field of Rectangular Small Enclosure under the Excitation of Panel Loudspeaker by Using FEM

Sound Field Excited by Panel Loudspeaker Simulation and Analysis of Rectangular Small Enclosure with FEM

Nonlinear supersonic flutter of a composite panel backed by an acoustic cavity with finite-amplitude sound waves

Vibration and acoustic radiation control of a panel with piezoelectric oscillators.

Acoustic modelling and analyses of geometrically complex systems with Micro-perforated panels

Sound-Absorption Mechanism of Structures with Periodic Cavities

Boundary Control of Sound Transmission into a Cavity Through Its Opening

Performance of an Independent Planar Virtual Sound Barrier at the Opening of A Rectangular Enclosure

Finite Element–Boundary Element Based Vibroacoustic Model For Nonhomogeneous Turbulent Boundary Layer Excited Composite Panels Involving The Cholesky Decomposition

Active control of noise in plate-cavity coupled systems using the pole placement method

Dynamic Response and Acoustic Radiation of Double-Leaf Metallic Panel Partition under Sound Excitation

THE SOUND RADIATION EFFICIENCY OF FINITE LENGTH ACOUSTICALLY THICK CIRCULAR CYLINDRICAL SHELLS UNDER MECHANICAL EXCITATION I: THEORETICAL ANALYSIS

Experimental Investigation on Vortex Sound Interaction in Self-Induced Acoustic Resonance

Analysis of Vibration-Damping Characteristics and Parameter Optimization of Cylindrical Cavity Double-Plate Phononic Crystal