Abstract:The effectiveness of USEPA-registered algaecides for managing algae in lakes and reservoirs has been extensively evaluated in laboratory studies, mesocosm studies and in situ treatment. However, the use of these algaecides in marine environments for the management of dinoflagellates and associated toxins remains largely unknown. Karenia brevis is a toxic dinoflagellate that causes red tides in the Gulf of Mexico. In this study, we investigated the efficacy of six USEPA-registered algaecides, three copper-based and three peroxide-based, on treating toxic K. brevis with a natural bloom density (1.79 x 107 cells/L). Our results indicate that the application of as low as 0.31-0.34 mg Cu/L led to a significant decrease of K. brevis cells within 24 h after treatment, while peroxide-based algaecides required a relatively higher concentration for the effective removal of K. brevis cells (4.89-7.08 mg H2O2/L), but still lower than maximum label rate. Total brevetoxin levels 72 h after treatment revealed that 1.00 mg Cu/L for Algimycin (R) PWF, 6.48 mg H2O2/L for PAK (R) 27 and 7.08 mg H2O2/L for Oxi-mycin (R) P5 had the greatest impact on decreasing toxin levels. The correlation analysis showed that brevetoxin reduction rate was significantly positively related with the peroxide-based algaecide exposure concentration, which is caused by the oxidation of hydroxyl radicals produced by hydrogen peroxide. The degradation dynamics of the three peroxide-based algaecides revealed that salinity, microorganisms and organic matter (>= 0.2 mu m) impact the stability of hydrogen peroxide, and Oximycin (R) P5 showed the highest stability among tested peroxide-based algaecides with a degradation rate of 0.467 mg/d in natural seawater. Hence, our laboratory work provided new insights into potential emergency treatment methods for immediate mitigation of K. brevis and brevetoxins. More work on the fate and persistence of algaecide active ingredients and phycotoxins, effects of site characteristics, and pilot studies on marine non-targets are still needed before safe application of this method for HABs in marine systems.

Development of Biological Risk Assessment Protocols for Evaluating the Risks of In-Water Cleaning of Hull-Fouling Organisms

Simulated Testing of the Characteristics and Environmental Impacts of Disinfection By-Products Generated by Ballast Water Management Systems in Ports during Phytoplankton Blooms

Detrimental effects of hull cleaning wastewater on oxidative status, life cycle parameters, and population growth of the monogonont rotifer Brachionus manjavacas

Treatment of the Red Tide Dinoflagellate Karenia Brevis and Brevetoxins Using USEPA-registered Algaecides.

Exposure to hull cleaning wastewater induces mortality through oxidative stress and cholinergic disturbance in the marine polychaete Perinereis aibuhitensis

Integrated Assessment of West Coast of South Korea by Use of Benthic Bacterial Community Structure As Determined by Edna, Concentrations of Contaminants, and in Vitro Bioassays.

Hull-cleaning wastewater poses serious acute and chronic toxicity to a marine mysid—A multigenerational study

Efficient inactivation of harmful algae K. mikimotoi by a novel algicidal bacterium via a rare direct contact pathway: Performances and mechanisms

Control of Nuisance Cyanobacteria in Drinking Water Resources Using Alternative Algae-Blocking Mats

Establishment of an antifouling performance index derived from the assessment of biofouling on typical marine sensor materials

Occurrence, removal, and prioritization of organic micropollutants in four full-scale wastewater treatment plants in Korea

Ballast Water Management Strategy to Reduce the Impact of Introductions by Utilizing an Empirical Risk Model

An indigenous microalgal pool containing Klebsormidium sp. K39 as a stable and efficacious biotechnological strategy for Escherichia coli removal in urban wastewater treatment

Diversity and Distribution Patterns of Biofouling Macrobenthos Based on the Ship Navigation Type

Optimizing the algae-bacteria biofilm reactor for imidacloprid wastewater treatment: An evaluation of hydraulic retention times for enhanced efficiency and energy savings

Specialized Grooming as a Mechanical Method to Prevent Marine Invasive Species Recruitment and Transport on Ship Hulls

Progress of Marine Biofouling and Antifouling Technologies

Monitoring and Risk Assessment of Pesticide Residues in Fishery Products Using GC–MS/MS in South Korea

Application of biological safety index in two Japanese watersheds using a bioassay battery

Understanding the fouling characteristics in ultrafiltration membrane for marine algae-laden seawater pretreatment: Focus on the role of algal extracellular organic matter

A New Treatment Strategy for Inactivating Algae in Ballast Water Based on Multi-Trial Injections of Chlorine