Abstract:We adopted grand canonical Monte Carlo (GCMC) simulations to comprehensively investigate the adsorption of CO2/N2 mixtures of different compositions in well-shaped single-walled carbon nanotubes (CNTs), stratified activated carbon fiber (ACF-15), and completely disordered silicon carbide-derived carbon (SiC-DC) at different temperatures. It was found that reducing the pore size initially enhances the adsorption and selectivity of CO2 for enhanced adsorbate–adsorbent interactions, which, however, eventually reduces the selectivity for the enhanced entropic effect. It was also revealed that formation of a cylindrical pore could dramatically enhance the potential field, emphasizing that the morphology of the carbons could have a significant impact on the adsorptive separation performance. While increasing the temperature reduces the separation performance, the enhanced mole fraction of CO2 after multistage separation facilitates the subsequent flue gas separation procedure. A performance coefficient was adopted to comprehensively measure the separation performance of nanoporous carbons on the separation of CO2 from CO2/N2 mixtures with varying compositions and at different temperatures. Among the CNTs considered, either the (6, 6) or the (7, 7) CNT achieves the best separation performance for specific working conditions, associated with the performance coefficient being around 1 order of magnitude higher than the counterparts of ACF-15 and SiC-DC.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c00086?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c00086</a>.Additional supporting atomistic configurations of the carbon structures and the orientation angle distribution of CO2 in the carbon of different structures, and variation of the adsorption of CO2 and N2 with radius of curvature in convex curved carbons (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c00086/suppl_file/ef1c00086_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly-efficient separation of SF6/N2 and NF3/N2 with record selectivity on one-step synthesized carbon nanosheet

Separation of perfluorinated electron specialty gases on microporous carbon adsorbents with record selectivity

In-situ Preparation of Nitrogen-Doped Unimodal Ultramicropore Carbon Nanosheets with Ultrahigh Gas Selectivity

From pore to process: ultra-efficient SF6/N2 continuous separation using inexpensive robust MOF composites

Pore engineering in cost-effective and stable Al-MOFs for efficient capture of the greenhouse gas SF6

Micromeso Hierarchical Porous Ultrathin Nitrogen-Doped Carbon Nanosheets with Rough Surfaces for Efficient Gas Adsorption and Separation

A nickel-based metal-organic framework for efficient SF6/N2 separation with record SF6 uptake and SF6/N2 selectivity

Room-Temperature Synthesis of a Fluorine-Functionalized Nanoporous Organic Polymer for Highly Efficient SF6 Adsorption and Separation

Carbon nanofibers with gas selective layer containing rich and accessible ultramicropores for methane/nitrogen separation

Algae-derived N-doped Porous Carbons with Ultrahigh Specific Surface Area for Highly Selective Separation of Light Hydrocarbons

Superior Selective CO2 Adsorption and Separation over N2 and CH4 of Porous Carbon Nitride Nanosheets: Insights from GCMC and DFT Simulations.

Optimal Performance of Nanoporous Carbons on Adsorptive Separation of CO 2 from Flue Gas

Anion-regulated Selective Growth Ultrafine Copper Templates in Carbon Nanosheets Network Toward Highly Efficient Gas Capture.

Microporous Carbon Adsorbents Prepared by Activating Reagent-Free Pyrolysis for Upgrading Low-Quality Natural Gas

Thermodynamic–Kinetic Synergistic Separation for O 2 /N 2 and CO 2 /CH 4 on Nanoporous Carbon Molecular Sieves

Rational design of carbon materials with tailored pore structure for efficient separation of CH 4 /N 2 mixture

N-rich chitosan-derived porous carbon materials for efficient CO2 adsorption and gas separation

Tailoring the pore structure modified with functional groups for superior CO2 adsorption capacity and the selectivity of separation

Pore Environmental Modification by Amino Groups in Robust Microporous MOFs for SF6 Capturing and SF6/N2 Separation

Design of a highly-stable cobalt (II) porous framework based on aromatic stacking strategy for efficient SF6 capture and SF6/N2 mixture separation

Facile preparation of N-doped porous carbon and its CO2 gas adsorption performance