Abstract:In this study, a fixed-bed catalytic membrane reactor was used for the production of ethylene and cyclohexane from ethane and benzene. A two-dimensional non-isothermal mathematical model was used for estimating the performance of the membrane reactor. Furthermore, the effect of inlet temperature (720–1080 K), feed molar ratio (3–10) and the reactor spacetime (1–76 kgCat.s/mol) was studied on the conversion of ethane to ethylene and benzene to cyclohexane. The results of modeling showed that with the increase of inlet temperature the conversion of both (de)-hydrogenation reactions increased and the 95% of ethane conversion was achieved when the molar ratio of benzene/ethane was fixed on 3. The hydrogenation of benzene at the shell side of the catalytic membrane reactor enhanced the production of ethylene due to the exothermic nature of the hydrogenation reaction, resulting in heat conduction through the membrane and glass substrate into the tube side. The comparison between experimental data reported in literature and modeling showed that the deviation of data obtained by mathematical modeling from experimental values ranged from 15.2 to 19.8% at various spacetimes. In addition, the results of sensitivity analysis showed that the conversion of benzene and ethane is more sensitive to the inlet temperature (up to 160% change on conversion) in comparison to the other parameters including feed ratio and the reactor spacetime. Moreover, at a temperature above 1128 K, the overall performance of the catalytic membrane reactor increased significantly.

Process intensification of selective acetylene hydrogenation reactor by bed configuration change: A case study of an ethylene plant

STUDY ON THE ACETYLENE HYDROGENATION PROCESS FOR ETHYLENE PRODUCTION: SIMULATION, MODIFICATION, AND OPTIMIZATION

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Acetylene Hydrogenation Processes Studied Using CFD in a Packed Bed Reactor

Experimental Study and Modeling of the Liquid Phase Hydrogenation of Acetylene

Simultaneous production of hydrogen and acrylonitrile in a new bifunctional micro-reactor, mathematical modeling and optimization study

Fluidized bed process and apparatus for producing ethylene with acetylene hydrogenation

Insights into reaction–diffusion behaviors of acetylene selective hydrogenation on pellet catalysts

Development and Intensification of the Ethylene Process Utilizing a Catalytic Membrane Reactor

CFD Simulation and Optimization of Adiabatic Reaction Process of C-2 Hydrogenation

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

CFD Study and RSM Optimization of Acetylene Production in Partial Oxidation Process

Ethylene and cyclohexane co-production in the fixed-bed catalytic membrane reactor: Experimental study and modeling optimization

Enhanced Selectivity in the Hydrogenation of Acetylene Due to the Addition of a Liquid Phase As a Selective Solvent

Intensification and performance assessment of ethanol production process by hydrogenation of methyl acetate

Thermal Effect Management via Entropy Variation Strategy to Improve the Catalyst Stability in Acetylene Hydrogenation

Room-temperature electrochemical acetylene reduction to ethylene with high conversion and selectivity

Ammoxidation of Propylene to Acrylonitrile in a Bench-Scale Circulating Fluidized Bed Reactor

Bi-modified Cu-Based Catalysts for Acetylene Hydrogenation: Leveraging Dispersion and Hydrogen Spillover

Numerical Modeling of Chemical Looping Oxidative Dehydrogenation of Ethane in Parallel Packed Beds

Gas–Liquid Mass Transfer Intensification for Selective Alkyne Semi-Hydrogenation with an Advanced Elastic Catalytic Foam-Bed Reactor