Abstract:The adhesion and damage behaviour of wheel–rail systems play an important role in the safety of railway operations. To verify the low adhesion behaviour of wheel and rail contact during the train entering tunnels in alpine regions caused by intermittent humid and warm airflow, tribology testing using a rolling–sliding contact in the laboratory was conducted to investigate the effect of humid and warm airflow with various ambient temperatures (− 55 to 60 °C) and airflow with different humidities (relative humidity from 5 to 99%) on the instantaneous low adhesion and damage failure between the wheel–rail interface. Results indicate that the instantaneous low adhesion phenomenon and multifarious damage are affected by the humidity of the airflow and the ambient temperature. In the temperature range of − 55 to − 20 °C, the wheel–rail interface will be in a low adhesion state once it encounters a humid and warm airflow attack. As a result, the adhesion coefficient curve exhibits a 'comb-shaped' feature. In this temperature range, the wear surface is rougher under the action of high moisture flow, and the main damage mechanism is fatigue wear. In particular, the moisture in the airflow will liquefy into water or even condense directly into frost and ice film on the wheel when the humid and warm airflow encounters the cold wheel surface. Consequently, the adhesion coefficient exhibits a 'comb-shaped' feature. In the meantime, the tribological oxidation reaction is more active at humid airflow conditions of 40–60 °C. The high humidity environment is conducive to the formation of water paste during friction, that is, a mixture of oxidized debris and water molecules that acts as friction-reducing layers, which also reduces the adhesion coefficient. These results will help deeply understand that, the wheel–rail adhesion coefficient drops sharply in an instant once the wheel–rail interface encounters the humid and warm airflow in the tunnel. Thus, railway operations department have to be very cognizant of the low adhesion problem, and take effective measures to improve the adhesion of wheel-rail interface to avoid the occurrence this kind of problem.

Field-based investigation of low adhesion leaf layers: Assessing layer initiation and environmental influences

Experimental investigation of wheel rail adhesion under leaf contamination conditions

Experimental Evaluation of Effect of Leaves on Railroad Tracks in Loss of Braking

Pressure induced transformation of biomass to a highly durable, low friction film on steel

Rail-wheel friction quantification and its variability under lab and field trial conditions

Influence of thermal loading parameters and microstructure on the formation of stratified surface layers on railway wheels

The effect of third bodies on wear and friction at the wheel-rail interface

Influence of Friction Modifiers on Improving Adhesion and Surface Damage of Wheel/Rail under Low Adhesion Conditions

Development of inter-particle friction in a railway ballast

Sanded Wheel–Rail Contacts: Experiments on Sand Crushing Behaviour

Research on wheel-rail dynamic interaction of high-speed railway under low adhesion condition

Adhesion and Damage Behaviour of Wheel–Rail Rolling–Sliding Contact Suffering Intermittent Airflow with Different Humidities and Ambient Temperatures

Stratified surface layers affecting crack propagation in wheel-rail contacts

Laboratory Investigation on the Particle-Size Effects in Railway Sanding: Comparisons Between Standard Sand and Its Micro Fragments

An experimental study on the effects of friction modifiers on wheel–rail dynamic interactions with various angles of attack

Effect of Critical Factors Influencing Longitudinal Track Resistance Leveraging Laboratory Track Panel Pull Test Experimentation

Wheel-rail contact and friction models: A review of recent advances

Towards a Standard Approach for the Twin Disc Testing of Top-Of Rail Friction Management Products

Railway track substructure: Recent research and future directions

Explicit finite element simulations of dynamic low adhesion behavior between wheel and rail in the presence of high-frequency vibrations

Liquid film morphology and aerodynamic performance of a high-speed train under wind-rain environments