Abstract:An integrated plasma profile control strategy, ARTAEMIS, is being developed for extrapolating present-day advanced tokamak (AT) scenarios to steady-state operation. The approach is based on semi-empirical modelling and was initially explored on JET (Moreau et al 2008 Nucl. Fusion 48 106001). This paper deals with the general applicability of this strategy for simultaneous magnetic and kinetic control on various tokamaks. The determination of the device-specific, control-oriented models that are needed to compute optimal controller matrices for a given operation scenario is discussed. The methodology is generic and can be applied to any device, with different sets of heating and current drive actuators, controlled variables and profiles. The system identification algorithms take advantage of the large ratio between the magnetic and thermal diffusion time scales and have been recently applied to both JT-60U and DIII-D data. On JT-60U, an existing series of high bootstrap current (∼70%), 0.9 MA non-inductive AT discharges was used. The actuators consisted of four groups of neutral beam injectors aimed at perpendicular injection (on-axis and off-axis), and co-current tangential injection (also on-axis and off-axis). On DIII-D, dedicated system identification experiments were carried out in the loop voltage (V ext) control mode (as opposed to current control) to avoid feedback in the response data from the primary circuit. The reference plasma state was that of a 0.9 MA AT scenario which had been optimized to combine non-inductive current fractions near unity with 3.5 < βN < 3.9, bootstrap current fractions larger than 65% and H 98(y,2) = 1.5. Actuators other than V ext were co-current, counter-current and balanced neutral beam injection, and electron cyclotron current drive. Power and loop voltage modulations resulted in dynamic variations of the plasma current between 0.7 and 1.2 MA. It is concluded that the response of essential plasma parameter profiles to specific actuators of a given device can be satisfactorily identified from a small set of experiments. This provides, for control purposes, a readily available alternative to first-principles plasma modelling.

A machine-learning-based tool for last closed-flux surface reconstruction on tokamaks

Kinetic Equilibrium Reconstruction on EAST Tokamak

Fast equilibrium reconstruction by deep learning on EAST tokamak

System identification for plasma shape control on EAST

Optical Plasma Boundary Reconstruction Based on Least Squares for EASTTokamak

Closed-Loop Tracking Control Of Poloidal Magnetic Flux Profile In Tokamaks

Reconstruction of Poloidal Magnetic Fluxes on EAST based on Neural Networks with Measured Signals

Real-time equilibrium reconstruction by neural network based on HL-3 tokamak

Simulation Prediction of Heat Transport with Machine Learning in Tokamak Plasmas

Real-time equilibrium reconstruction by multi-task learning neural network based on HL-3 tokamak

Tokamak divertor plasma emulation with machine learning

Application of machine learning and artificial intelligence to extend EFIT equilibrium reconstruction

AI-Machine Learning-Enabled Tokamak Digital Twin

High-Fidelity Data-Driven Dynamics Model for Reinforcement Learning-based Magnetic Control in HL-3 Tokamak

Reconstruction of Poloidal Magnetic Field Profiles in Field-Reversed Configurations with Machine Learning in Laser-Driven Ion-Beam Trace Probe

Surrogate model of turbulent transport in fusion plasmas using machine learning

Experiment data-driven modeling of tokamak discharge in EAST

Real-time plasma boundary shape reconstruction using visible camera on EAST Tokamak

Plasma Models for Real-Time Control of Advanced Tokamak Scenarios

Machine Learning Application to Predict the Electron Temperature on the J-TEXT Tokamak

Overview of machine learning applications in fusion plasma experiments on J-TEXT tokamak