Abstract:Composite films with ferroelectric nanowires as fillers exhibit high adiabatic temperature change to meet the demand of solid-state refrigeration, and their parallel-distributed filled nanowires are considered to be the key factor because of the different orientation from that of the conventional perpendicular distribution. However, the intrinsic mechanism of the electrocaloric effect of nanowires distributed in parallel is not well understood. In this paper, a parallel-distributed PbTiO 3 nanowire model is established to investigate the effects of surface stress and solid solution modification on their electrocaloric effects through phase field simulations. The results show that an adiabatic temperature change of 5 K can be obtained near 200 °C with 1.5% compressive stress under an electric field of 260 kV/cm. In order to further reduce its operating temperature, the electrocaloric effects of PST nanowires with different Sr contents were calculated, and it was found that the lower the doping amount of Sr the higher the phase transition temperature of PST nanowires. When the doping amount of Sr is 0.45, the phase transition temperature of the nanowires can be lowered to near 100 °C, where an adiabatic temperature change of greater than 8 K can be obtained with an electric field of 600 kV/cm. Even in the low-temperature interval from 50 to 100 °C the nanowires exhibit an adiabatic temperature change close to 8 K. The nanowires are also characterized by an adiabatic temperature change in the low-temperature interval from 50 to 100 °C. Meanwhile, in conjunction with the evolution of the simulated three-dimensional domain structure, the intrinsic mechanism of the change of the electrocaloric effect under surface stress and solid solution modification is revealed to be due to the occurrence of different types of domain switchings. Finally, the parameter combinations of components and surface stresses corresponding to the maximum value of the electrocaloric effect at different operating temperatures are discussed and analyzed. The present study provides useful theoretical guidance for the development of solid-state refrigeration based on parallel-distributed ferroelectric nanowires.

Surface stress and solid solution modification phase field simulation of nanowire electrocaloric effect

Phase-field Simulations on the Electrocaloric Properties of Ferroelectric Nanocylinders with the Consideration of Surface Polarization Effect

Stress Effect on the Electrocaloric Properties of PbTiO3 Nanocylinders with the Consideration of Surface Polarization

Effects of Pre-Stress and Surface Stress on Phonon Thermal Conductivity of Rectangular Si Nanowires

Giant Electrocaloric Effect in Ferroelectric Nanotubes Near Room Temperature

Room Temperature Electrocaloric Effect in PTO/STO Superlattice Induced by Topological Domain Transition

Giant Electrocaloric Effect in Ferroelectric Ultrathin Films at Room Temperature Mediated by Flexoelectric Effect and Work Function

Effect of Geometric Configuration on the Electrocaloric Properties of Nanoscale Ferroelectric Materials

Electrocaloric Effect Enhancement in Compositionally Graded Ferroelectric Thin Films Driven by a Needle-to-vortex Domain Structure Transition

Large electrocaloric effect near room temperature induced by domain switching in ferroelectric nanocomposites

Toward Wearable Cooling Devices: Highly Flexible Electrocaloric Ba0.67Sr0.33TiO3 Nanowire Arrays

Understanding electrocaloric cooling of ferroelectrics guided by phase‐field modeling

Large Electrocaloric Effect Induced by the Multi-Domain to Mono-Domain Transition in Ferroelectrics

Large Electrostrain Induced by Reversible Domain Switching in Ordered Ferroelectric Nanostructures with Optimized Geometric Configurations

Colossal Room-Temperature Electrocaloric Effect in Ferroelectric Polymer Nanocomposites Using Nanostructured Barium Strontium Titanates

Giant Electrocaloric Effect and Breakdown Field Strength in Ferroelectric Terpolymer Nanocomposites by Morphologically Diverse Nanostructures

Giant Room-Temperature Electrocaloric Effect of Polymer-Ceramic Composites with Orientated BaSrTiO 3 Nanofibers

Wearable Devices: Toward Wearable Cooling Devices: Highly Flexible Electrocaloric Ba0.67Sr0.33TiO3 Nanowire Arrays (Adv. Mater. 24/2016)

Strain-induced Broadening Temperature Range of Electrocaloric Effects in Ferroelectric Superlattices

Phase diagrams and polar properties of ferroelectric nanotubes and nanowires

Optimized Electrocaloric Refrigeration in Lead-Free NaNbO3-Based Ceramics via AFE ↔ FE Phase Transition Modulation