Abstract:In this work, we developed and exploited simulation tools to optimize the performances of rare earth doped fiber amplifiers (REDFAs) for space missions. To describe these systems, a state-of-the-art model based on the rate equations and the particle swarm optimization technique is developed in which we also consider the main radiation effect on REDFA: the radiation induced attenuation (RIA). After the validation of this tool set by confrontation between theoretical and experimental results, we investigate how the deleterious radiation effects on the amplifier performance can be mitigated following adequate strategies to conceive the REDFA architecture. The tool set was validated by comparing the calculated Erbium-doped fiber amplifier (EDFA) gain degradation under X-rays at ∼300 krad(SiO2) with the corresponding experimental results. Two versions of the same fibers were used in this work, a standard optical fiber and a radiation hardened fiber, obtained by loading the previous fiber with hydrogen gas. Based on these fibers, standard and radiation hardened EDFAs were manufactured and tested in different operating configurations, and the obtained data were compared with simulation data done considering the same EDFA structure and fiber properties. This comparison reveals a good agreement between simulated gain and experimental data (<10% as the maximum error for the highest doses). Compared to our previous results obtained on Er/Yb-amplifiers, these results reveal the importance of the photo-bleaching mechanism competing with the RIA that cannot be neglected for the modeling of the radiation-induced gain degradation of EDFAs. This implies to measure in representative conditions the RIA at the pump and signal wavelengths that are used as input parameters for the simulation. The validated numerical codes have then been used to evaluate the potential of some EDFA architecture evolutions in the amplifier performance during the space mission. Optimization of both the fiber length and the EDFA pumping scheme allows us to strongly reduce its radiation vulnerability in terms of gain. The presented approach is a complementary and effective tool for hardening by device techniques and opens new perspectives for the applications of REDFAs and lasers in harsh environments.

Fiber Optic Sensors for Harsh and High Radiation Environments in Aerospace Applications

Innovative Photonic Sensors for Safety and Security, Part II: Aerospace and Submarine Applications

Optical Fiber Sensors in Extreme Temperature and Radiation Environments: A Review

Fiber Bragg grating sensors for aerospace applications: a review

Multifunctional Integration of Optical Fibers and Nanomaterials for Aircraft Systems

Numerical Analysis of Radiation Effects on Fiber Optic Sensors

Radiation resistant erbium doped fiber for ASE source and fiber gyroscope application

Recent Advances in Optical Fiber High-Temperature Sensors and Encapsulation Technique[invited]

Toward Optical Sensors: Review and Applications

Recent Advances in Optical Fiber Enabled Radiation Sensors

Optical Fiber Sensors for Aircraft Structural Health Monitoring

Adaptive wireless sensor for aerospace application

Structural Deformation Monitoring of Flight Vehicles Based on Optical Fiber Sensing Technology: A Review and Future Perspectives

Optimized radiation-hardened erbium doped fiber amplifiers for long space missions

photonic sensors review progress of optical fiber sensors and its application in harsh environment

Multifunctional fiber-optic sensors for space infrastructure

Optical Fiber Sensors for High-Temperature Monitoring: A Review

Fiber-optic sensing system: Overview, development and deployment in flight at NASA

High Energy Physics Applications on Fiber Optic Sensors in Relative Humidity

Radiation-resistant erbium-doped fiber for spacecraft applications