Abstract:Direct conversion of CO 2 into light olefins (C 2 -C 4 = ) offers a promising approach to mitigating CO 2 emissions and lessening reliance on feedstock derived from petroleum-based feedstocks while generating high value-added chemicals. Achieving an effective synergy between Fe 3 O 4 and Fe 5 C 2 is crucial for the hydrogenation of CO 2 . However, the mechanisms underlying this synergy and strategies for its optimization remain inadequately explored. Herein, we clearly addressed this issue by synthesizing a range of FeNa/NC- x catalysts, wherein the precise control of the Fe 5 C 2 /Fe 3 O 4 ratio was manipulated through the adjustment of the initial amount of Fe precursor (denoted by x in the catalysts' names). Among the synthesized catalysts, FeNa/NC-0.6, with the Fe 5 C 2 /Fe 3 O 4 ratio of 2.4, displays the superior CO 2 conversion (32.6 %) and STY C2-C4= (54.6 μmol CO2 g Fe −1 s −1 ). Moreover, its remarkable C 2 -C 4 = selectivity (47.6 %) and ultra-high STY C2-C4= both fall into a high level among reported Fe-based catalysts for CO 2 hydrogenation to light olefins. The excellent catalytic performance can be attributed to the optimized synergistic effect of Fe 3 O 4 and Fe 5 C 2 . Reducing the initial amount of Fe precursor weakens the metal-support interaction, which in turn increases the Fe 5 C 2 /Fe 3 O 4 ratio. This adjustment results in a perfect balance between the density of CO* intermediates and the quantity of Fe 5 C 2 active sites when the ratio reaches 2.4, thereby enhancing the Fischer-Tropsch synthesis (FTS) process and ultimately improving the catalytic efficiency for CO 2 hydrogenation. This paper offers a strategy to optimize synergy of Fe 3 O 4 and Fe 5 C 2 for enhancing catalytic performance and a mechanistic insight, which can be utilized in designing efficient catalysts for other heterogeneous catalytic reactions.

CO 2 Hydrogenation over Fe-Mn-Zn Spinel Oxide Nanohybrids Precatalysts

Fabrication of Transition Metal (Mn, Co, Ni, Cu)‐Embedded Faveolate ZnFe2O4 Spinel Structure with Robust CO2 Hydrogenation into Value‐added C2+ Hydrocarbons

Superparamagnetic Iron Oxide Nanoparticles on ZrO2 as Catalysts for CO2 Hydrogenation to Lower Olefins

Spinel Nanostructures for the Hydrogenation of CO2 to Methanol and Hydrocarbon Chemicals

Enhancing CO 2 hydrogenation performance via the synergistic effects of iron carbides and iron oxides

Highly Active and Stable Catalysts Derived from Bimetal-ZIFs for Selective CO 2 Hydrogenation to Valuable Hydrocarbons

Hydrogenation of CO2 over Cu-Fe-Na/zeolite composite catalysts

Selective CO 2 hydrogenation to liquid fuels over Na-decorated FeMgMnOx catalyst with high carbon efficiency

Highly Active and Stable Catalysts Derived from Bimetal-ZIFs for Selective CO2 Hydrogenation to Valuable Hydrocarbons

Effect of Cu and Zn on the performance of Cu-Mn-Zn/ZrO2 catalysts for CO2 hydrogenation to methanol

Facet-Controlled Cu-doped and K-promoted Fe2O3 nanosheets for efficient CO2 hydrogenation to liquid hydrocarbons

Sodium Promoted FeZn@SiO2-C Catalysts for Sustainable Production of Low Olefins by CO2 Hydrogenation

Tuning CO2 Hydrogenation Selectivity Via Metal-Oxide Interfacial Sites

Heteroatom doped iron-based catalysts prepared by urea self-combustion method for efficient CO2 hydrogenation

Zeolite-confined Fe-site Catalysts for the Hydrogenation of CO2 to Produce High-value Chemicals

Hydrogenation of CO2 to Valuable C2-C5 Hydrocarbons on Mn-Promoted High-Surface-Area Iron Catalysts

Carbon Dioxide Hydrogenation to Light Olefins over ZnO-Y2O3 and SAPO-34 Bifunctional Catalysts

Hybrid Catalyst Coupling Zn Single Atoms and CuNx Clusters for Synergetic Catalytic Reduction of CO2

Insights into the regulation of FeNa catalysts modified by Mn promoter and their tuning effect on the hydrogenation of CO2 to light olefins

Selective synthesis of olefins via CO 2 hydrogenation over transition-metal-doped iron-based catalysts

Carbon Monoxide Hydrogenation on Fe 2 O 3 /zro 2 Catalysts