Abstract:Abstract Windows are of great importance in improving the energy efficiency of buildings. It is possible to achieve this with the help of the regeneration of window design. The amount of energy used, the expense of heating and cooling, and the emissions of greenhouse gases that contribute to climate change can all be significantly reduced by improving the energy efficiency of windows. For this, computer modeling and BIM-based simulation programs provide significant timesaving in simultaneously evaluating design variations’ visual and thermal results. This study selected a four-story residential building to analyze the energy load and thermal comfort of the windows redesign and examine the energy-saving potential for residential buildings. To analyze the renewed window design strategies, a four-story apartment building is selected as a case study in Izmir/Turkey (38° 4′, 27° 2′). This apartment is built on a 90 m2 gross floor area. The existing indoor environmental conditions of the flat are generally observed as cool and low illuminated by the occupants, so the window design options must be compared and renewed. As the first option, current conditions are simulated. The second option is to simulate different patterns for window-to-wall ratio (WWR). Moreover, the third option is to simulate different types of glass in each window. Currently, the WWR of the selected flat in the north, east and south directions is around 10%. But more is needed to provide daylight to the apartment. This article used Autodesk Revit and Green Building Studio simulations to investigate WWR and glass types and evaluate energy use intensity’s (EUI) impact. As a result, this study shows that a 10% WWR on all building facades leads to an EUI of 993.9 MJ/m2/year. In contrast, increasing the WWR to 95% significantly increased EUI, reaching 2121 MJ/m2/year. In addition, it has been shown that the use of low U-value glasses, such as translucent wall panels and super-insulated three-pane clear Low-E, can provide energy savings of up to 5% per year, and especially the super-insulated three-pane Low-E glass type provides the highest efficiency on all facades.

Effects of Double Glazing, Black Wall, Black Carpeted Floor and Insulation On Thermal Performance of Solar-Glazed Balconies

The Balcony Shape of Residential House in Cold Zone and the Thermal Control

Effect of balcony forms difference on indoor thermal environment and energy saving performance of multiple-dwelling house

The Effect of Shading Factor for Single and Double Glazing According to Solar Heat Gain / Window Heat Loss Ratio in Turkey for Residential Buildings

Energy and Thermal Performance Analysis of PCM-Incorporated Glazing Units Combined with Passive and Active Techniques: A Review Study

Alternative window wall ratio of glasses with different solar heat gain coefficient and solar transmittance and their effect on total energy consumption in alternative directions

Numerical Study on the Thermal Insulation of Smart Windows Embedded with Low Thermal Conductivity Materials to Improve the Energy Efficiency of Buildings

Natural Airflow in a Reversible Double-Glass Window with Reflective Film for Building Applications

Recommendations for Improvement of the Thermal Performance of an Office Building Based on Retrofitting the Glazed Curtain Wall

Experimental Investigation to Determine the Performance of Solar Thermal Collector with Single and Double Glazing

Assessment of window renovation potential in an apartment with an energy performance approach

Thermal enhancement of windows performance by means of innovative technologies

Influence of sunspace on energy consumption of rural residential buildings

Thermal Performance Optimization of Double and Triple Glazing Systems for Slovenian Climate Conditions

Thermal performance of retrofitted secondary glazed windows in residential buildings – two cases from Australia

The Effects of Exterior Glazing on Human Thermal Comfort in Office Buildings

Thermal Efficiency of External Walls Steel Buildings with Balconies

Assessment of the visual, thermal and energy performance of static vs thermochromic double-glazing under different European climates

Performance Demonstration and Simulation of Thermochromic Double Glazing in Building Applications

Empirical and Numerical Analysis of an Opaque Ventilated Facade with Windows Openings under Mediterranean Climate Conditions

Experimental Analysis of Thermo-Technical Parameters of Windows Glazing in the Pavilion Laboratory