Abstract:The tunnel field‐effect transistor (TFET) is considered to be a suitable substitute for metal oxide semiconductor‐field effect transistors in the post‐“Moore's Law” era owing to its low power consumption. However, Si‐TFETs face the drawbacks of low on‐state currents and significant ambipolar leakage. This study proposes a GeSi/Si heterojunction double‐gate TFET with a T‐channel hetero‐gate dielectric (HJ‐HGD‐DGTFET) structure to overcome these problems. It also presents a novel method of predicting and optimizing the performance of the existing TFETs which use deep learning to accelerate the device design. Furthermore, this study proposes a neural network based on different requirements to perform two functions: prediction of the device performance using the forward design, and the forecast of the device structure using the inverse design. It can thus be used to determine whether the output of the network meets the design objectives and if it is necessary to change the output by adjusting the input, and lastly achieve the TFET performance prediction and device optimization. The proposed method can be used to design TFETs accurately and efficiently even without professional knowledge. This study provides guidance for the design and optimization of TFETs along with other microelectronic devices. At present, the electrical characteristics of tunnel field‐effect transistors (TFETs) are mainly obtained by modeling the device through TCAD simulation tools. The method, time‐consuming and cumbersome, cannot satisfy the needs for the development of TFETs. A novel method is proposed for predicting and optimizing the performance of existing TFETs which use Deep Learning to accelerate device designing in this paper. The work may be a breakthrough in the field of TFETs optimization and performance prediction.

Prediction of Device Characteristics of Feedback Field-Effect Transistors Using TCAD-Augmented Machine Learning

A Machine Learning Approach for Optimizing and Accurate Prediction of Performance Parameters for Stacked Nanosheet Transistor

A Machine Learning Approach to TCAD Model Calibration for MOSFET

Device parameter prediction for GAA junctionless nanowire FET using ANN approach

Optimization and Performance Prediction of Tunnel Field‐Effect Transistors Based on Deep Learning

Prediction of JTE breakdown performance in SiC PiN diode radiation detectors using TCAD augmented machine learning

Artificial Neural Network Models for Metal-Ferroelectric-insulator-semiconductor Ferroelectric Tunnel Junction Memristor

Algorithm prediction of single particle irradiation effect based on novel TFETs

Device Modeling Based on Cost-Sensitive Densely Connected Deep Neural Networks

Improvement of TCAD Augmented Machine Learning Using Autoencoder for Semiconductor Variation Identification and Inverse Design

Prediction of electrical properties of GAAFET based on integrated learning model

Improving Semiconductor Device Modeling for Electronic Design Automation by Machine Learning Techniques

A Fully Analytical Current Model for Gate–Source Overlap Tunneling FETs as the Ternary Devices

Degradation Prediction of GaN HEMTs under Hot-Electron Stress Based on ML-TCAD Approach

An Artificial Neural Network Model for Electro-Thermal Effect Affected Hot Carrier Injection Reliability in 14-nm FinFETs

A Random Forest Model for Predicting and Analyzing the Performance of CNT TFET with Highly Doped Pockets

Low-cost High-Accuracy Variation Characterization for Nanoscale IC Technologies Via Novel Learning-Based Techniques.

Machine Learning-Based Device Modeling and Performance Optimization for FinFETs

Statistically Modeling I–V Characteristics of CNT-FET with LASSO

Transistor Compact Model Based on Multigradient Neural Network and Its Application in SPICE Circuit Simulations for Gate-All-Around Si Cold Source FETs

Framework for TCAD Augmented Machine Learning on Multi-I-v Characteristics Using Convolutional Neural Network and Multiprocessing