Abstract:In the conventional wet slurry method for making lithium-ion battery (LIB) electrodes, unwanted N-Methyl-2-Pyrrolidone (NMP) solvent is used. The use of NMP increases the overall energy demand during electrode coating since NMP needs to be dried from the coated slurry and recovered. The improper use of NMP can also impose detrimental effects on health and the environment. Thus, solvent-free dry processes are gaining increased interest worldwide for electrode fabrication. Amongst different dry electrode manufacturing techniques, electrostatic spray deposition (ESD) is one of the most promising techniques. In this study, positive LiNi0.8Co0.1Mn0.1O2 (NMC811) electrodes were manufactured by the ESD process and wet slurry process. The differences between the electrodes made by these two processes were investigated by the peel strength test, electrochemical techniques (e.g., rate tests, electrochemical impedance spectroscopy, and constant voltage/constant current cycling), scanning electron microscopy with energy dispersive x-ray spectroscopy, and X-ray photoelectron spectroscopy. In the dry electrodes, most active material particles were densely covered by the binder and conductive agents. Whereas in wet slurry electrodes, binder and conductive agents were distributed more homogenously both on the active material surfaces and between the active material particles. The uniform distribution of the binder and conductive agents in the slurry electrodes results in a robust conductive network, leading to better performance at high C- rates (e.g., 2-5C). Interestingly, the dry electrodes had comparable performance to slurry electrodes at the initial stages of electrochemical testing with low current rates. Hence, it can be concluded that the distribution of the electrode materials affects active material usage and the conductive paths, and a homogenous distribution is needed to achieve faster discharge capacity at higher C rates. Future work will focus on the long-term cycling performance of the electrodes to further understand the degradation mechanisms and differences between the two types of electrodes.

Particle interactions during dry powder mixing and their effect on solvent-free manufactured electrode properties

Understanding Interfacial‐Energy‐Driven Dry Powder Mixing for Solvent‐Free Additive Manufacturing of Li‐Ion Battery Electrodes

Effects of dry powder mixing on electrochemical performance of lithium-ion battery electrode using solvent-free dry forming process

Effects of Particle Sizes of Active Materials and Conductive Additive on the Electrochemical Performance of a Semi-Solid Flow Battery

Understanding the Effects of the Mixing Processes on the Performance of NMC-LMO Blend Electrodes Made by a Dry Electrostatic Spray Deposition Process

Simulation of Micro/Nanopowder Mixing Characteristics for Dry Spray Additive Manufacturing of Li-Ion Battery Electrodes

Influence of Mixing Process on the Performance of Electrodes Made by a Dry Coating Method

Surface Engineering Based on Conductive Agent Dispersion Uniformity: Strategies toward Performance Consistency of Lithium-Ion Batteries

Optimization of electrode manufacturing processes from the perspective of mechanical properties

Effects of the mixing sequence on the graphite dispersion and resistance of lithium-ion battery anodes

Modeling and Optimizing the Drying Process of Electrode Manufacturing for Lithium‐Ion Batteries

Dry Electrode Processing Technology and Binders

An In-Situ Synergistic Enhancement Strategy from G-C3n4 and PDOL Composite Solid Electrolyte on the Interface Stability of Solid-State Lithium Battery

Slurry solvent content influence on electrode preparation, microstructure and performance

Insights into the Correlation Among Porosity, Mechanical Properties, Morphology, Electrical Conductivity and Electrochemical Performance of Dry-Processed Cathodes

Investigating the Structure and Performance of Electrodes Made by Dry and Wet Slurry Processes

Development of Efficient Ink Dispersion Process for Solid-State Electrolyte and Electrode Manufacturing

Shear force effect of the dry process on cathode contact coverage in all-solid-state batteries

Analysis of Solvent‐Free Intensive‐Dry‐Mixed NMC‐Based Lithium‐Ion Battery Cathodes: Numerical Investigations on Performance Determinants

Investigating the Structure and Performance Differences between the Electrodes Made by a Dry and a Wet Slurry Processes

Probing Charge Transport and Microstructural Attributes in Solvent‐ versus Water‐Based Electrodes with a Spotlight on Li–S Battery Cathode