Abstract:In this paper, the depth-sensing indentation (DSI) technique was used to investigate the mechanical properties at the mesoscopic scale of 18Cr–8Ni austenitic stainless steel subjected to low-cycle fatigue loading. For this purpose, several representative analytical approaches for extracting basic mechanical properties, such as the indentation hardness (H), Young's modulus (E), yield strength (σys), strain hardening exponent (n) and plastic energy (Wp), from the indentation load–depth (P–h) curve were introduced. A series of experiments including constant amplitude low-cycle fatigue tests, DSI measurements and transmission electron microscopy (TEM) observations were carried out to obtain the change characteristics of the mechanical properties at the mesoscopic scale of the material as well as their micromechanisms. It is shown that, for the polycrystalline metal investigated, the cyclic plastic deformation remarkably influences its subsequent elastic–plastic response of the small volume material to the indentation process. As the strain amplitudes increases, the mesoscopic mechanical properties (H, E, σys, and n) show increase, while the plastic energy of the indentation (Wp) exhibits a decrease process. Microstructure observations using TEM reveal that, with increasing strain amplitudes, the dislocation substructures in the material tend towards cell formation and the size of dislocation cells tend to progressively decrease. The dependence of the microstructures on the applied strain amplitude is thus responsible for the change characteristics of the mechanical properties at the mesoscopic scale of the material subjected to low-cycle fatigue loading.

Dynamic strain aging and microstructural damage mechanism of austenitic stainless steel under thermomechanical fatigue in the temperature range of 250–400 °C

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Variation In Mechanical Properties, Microstructures And Fracture Behavior Of 304 Stainless Steel During Low-Cycle Fatigue

The low-cycle fatigue, deformation and final fracture behaviour of an austenitic stainless steel

Depth-Sensing Indentation-Based Studies of Surface Mechanical Behavior and Fatigue Damage Evolution of an Austenitic Stainless Steel Subjected to Cyclic Straining

Determination of fatigue mesoscopic mechanical properties of an austenitic stainless steel using depth-sensing indentation (DSI) technique

Investigation of fatigue mechanical properties of apolycrystalline solid at mesoscopic scale using depth-sensing indentation (DSI) technique

Multi-scale Deformation Behavior Investigation of 18cr–8ni Austenitic Steel Subjected to Low-Cycle Fatigue Loading

Microstructural manifestation of dynamic strain aging in AISI 316 stainless steel

Mechanism of Fatigue-Life Extension Due to Dynamic Strain Aging in Low-Carbon Steel at High Temperature

Cyclic deformation mechanism and fracture behaviour of 316L stainless steel under thermomechanical fatigue loading

Dynamic strain ageing of austenitic Ni-based alloy during cyclic loading at 350 °C: Mechanism and its evolution

Isothermal and thermomechanical fatigue behavior of 316LN stainless Steel: Effects of strain amplitude

Thermomechanical fatigue properties and microstructural damage of nitrogen alloyed 316LN stainless steel

Dynamic strain aging behavior of an advanced alumina-forming austenite stainless steel based on Fe-30Ni-15Cr-3.5Al

Multiaxial fatigue behaviour and damage mechanisms of P92 steel under various strain amplitudes and strain ratios at high temperature

Mechanical Behavior and Fatigue Performance of Austenitic Stainless Steel under Consideration of Martensitic Phase Transformation

Bending fatigue behavior of metastable and stable austenitic stainless steels with different surface morphologies

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

Effects of Dynamic Strain Aging on Strain Hardening Behavior, Dislocation Substructure, and Fracture Morphology in a Ferritic Stainless Steel

Effects of temperature and strain amplitude on low-cycle fatigue behavior of 12Cr13 martensitic stainless steel