Abstract:Hybrid organic-inorganic solar photovoltaic (PV) cells capable of directly converting sunlight to electricity have attracted much attention in recent years. Despite evident technological advancements in the PV industry, the widespread commercialisation of solar cells is still being mired by their low conversion efficiencies and high cost per Watt. Perovskites are an emerging class of semiconductors providing a low-cost alternative to silicon-based photovoltaic cells, which currently dominate the market. This thesis develops a series of studies on “all-solid state perovskite solar cells” fabricated via vapour deposition which is an industrially-accessible technique, to achieve planar heterojunction architectures and efficient PV devices. Chapter 2 presents a general outlook on the operating principles of solar cells, delving deeper into the specific operational mechanism of perovskite solar cells. It also explores the usual methods employed in the fabrication of perovskite thin films. Chapter 3 describes the experimental procedures followed during the fabrication of the individual components constituting the device from the synthesis of the precursors to the construction of the functioning perovskite PV devices. Chapter 4 demonstrates pioneering work involving the dual-source vapour deposition (DSVD) of planar heterojunction perovskite solar cells which generated remarkable power conversion efficiency values surpassing 15%. These significant results pave the way for the mass-production of perovskite PVs. To further expand the range of feasible vapour deposition techniques, a two-layer sequential vapour deposition (SVD) technique is explored in Chapter 5. This chapter focusses on identifying the factors affecting the fundamental properties of the vapour-deposited films. Findings provide an improved understanding of the effects of precursor compositions and annealing conditions on the films. Chapter 5 concludes with a comparison between SVD and DSVD fabricated films, highlighting the benefits of each vapour deposition technique. Furthermore, hysteretic effects are analysed in Chapter 6 for the perovskite PV devices fabricated based on different structural configurations. An interesting discovery involving the temporary functioning of compact layer-free perovskite PV devices suggests the presence of a built-in-field responsible for the hysteresis of the cells. The observations made in this chapter yield a new understanding of the functionality of individual cell layers. Combining the advantages of the optimum vapour deposition technique established in Chapter 4 and Chapter 5, with the enhanced understanding of perovskite PV cell operational mechanism acquired from Chapter 6, an ongoing study on an “all-perovskite” tandem solar cell is introduced in Chapter 7. This demonstration of the “all-perovskite” tandem devices confirms the versatility of perovskites for a broader range of PV applications.

An investigation of liquid-junction perovskite solar energy storage cell

Constructing Ultra-Shallow Near-Edge States for Efficient and Stable Perovskite Solar Cells

Surface Ligand Management for Stable FAPbI3 Perovskite Quantum Dot Solar Cells

A Small‐Molecule “charge Driver” Enables Perovskite Quantum Dot Solar Cells with Efficiency Approaching 13%

Comparing Charge Dynamics in Organo-Inorganic Halide Perovskite: Solid-State versus Solid-Liquid Junctions

Reducing the Interfacial Energy Loss Via Oxide/perovskite Heterojunction Engineering for High Efficient and Stable Perovskite Solar Cells

Efficient and Stable Perovskite Solar Cells by Fluorinated Ionic Liquid–Induced Component Interaction

Interpenetrating interfaces for efficient perovskite solar cells with high operational stability and mechanical robustness

Lead-Free Perovskite-Based Bifunctional Device for Both Photoelectric Conversion and Energy Storage

Solid-State Hybrid Photovoltaic Cells with A Novel Redox Polymer and Nanostructured Inorganic Semiconductors

Ionic Liquid Engineering in Perovskite Photovoltaics

Sodium Carboxymethyl Starch-Based Highly Conductive Gel Electrolyte for Quasi-Solid-state Quantum Dot-Sensitized Solar Cells

Quasi-solid-state quantum dot sensitized solar cells with power conversion efficiency over 9% and high stability

Reversible Charge Transfer and Adjustable Potential Window in Semiconductor/Faradaic Layer/Liquid Junctions

Energy Storage Research of Metal Halide Perovskites for Rechargeable Batteries

Ionic Liquid Modified Polymer Intermediate Layer for Improved Charge Extraction toward Efficient and Stable Perovskite/Silicon Tandem Solar Cells

Highly Integrated Perovskite Solar Cells‐Based Photorechargeable System with Excellent Photoelectric Conversion and Energy Storage Ability

Holistic Dielectric and Buffer Interfacial Layers Enable High-Efficiency Perovskite Solar Cells and Modules

Photoexcited Hot and Cold Electron and Hole Dynamics at FAPbI3 Perovskite Quantum Dots/Metal Oxide Heterojunctions Used for Stable Perovskite Quantum Dot Solar Cells

Antisolvent‐Assisted in Situ Cation Exchange of Perovskite Quantum Dots for Efficient Solar Cells

Planar heterojunction perovskite solar cells via vapour deposition and solution processing