Abstract:The plastic deformation behavior of metal plates has been proved to be affected by loading paths. Plastic flow is a critical component in the mechanical description of plastic deformation, like yield and hardening. In this work, the anisotropic plastic flow of two metal plates (16MnCr5 and S420MC) under non-proportional loading conditions was investigated. Large specimens manufactured along different orientations were pre-tensioned up to various strain levels; subsequently, small uniaxial tensile specimens were cut from the pre-tensioned specimens along different orientations with the interval of 15°, and then loaded to rupture. Meanwhile, the r-value, a measure of anisotropic plastic flow, was recorded. Result shows that for the studied plates which had constant r-value in the monotonic uniaxial tensile tests, a downward evolution of the r-value against plastic strain was observed when the Schmitt angle of two stage loading directions was greater than 90°. As the plastic strain in the subsequent loading stage accumulated, the r-value dropped from a higher level to its original level within a strain range about 6.0%. Based on the transient r-value evolution, a HEXAH-based evolutionary plastic potential model was constructed within the framework of non-associated flow (non-AF) theory. In the model, a local ellipse-shape distortion of the plastic potential surface was defined during plastic deformation process and when the Schmitt angel exceeded 90°, such distortion caused a downward evolution of the r-value in the subsequent deformation. The calibration result indicates that the model could reproduce the transient r-value response relevant to loading path change. The proposed evolutionary plastic potential model can be applied together with different anisotropic hardening models in the non-AF theory to give a detailed description of the plastic deformation behavior and hopefully provide a solution for the accurate simulation of the complex sheet metal forming process.

Phenomenological Modeling of Deformation-Induced Anisotropic Hardening Behaviors: A Review

A Constitutive Model for Strain Hardening Behavior of Predeformed Amorphous Polymers: Incorporating Dissipative Dynamics of Molecular Orientation

A review of research in macroscopic hardening models in numerical simulation of sheet metal forming

A generalized thermodynamic approach for modeling nonlinear hardening behaviors

Anisotropic-Asymmetric Hardening Characterization of BCC/FCC/HCP Metals: Experiments and Modeling

An Evolutionary Anisotropic Model for Sheet Metals Based on Non-Associated Flow Rule Approach

Plastic Deformation Behavior of Metal Materials: A Review of Constitutive Models

Experimental and Modeling Investigation on Anisotropic Plastic Flow of Metal Plates under Nonproportional Loading Conditions

A Generally Anisotropic Hardening Model for Big Offset-Strain Yield Stresses

Modeling of material deformation behavior in micro-forming under consideration of individual grain heterogeneity

On the Grain Size Dependent Working Hardening Behaviors of Severe Plastic Deformation Processed Metals

Characterisation and modelling of anisotropic hardening behaviour of cubic and hexagonal close packed polycrystalline metals

Effect of Material Anisotropy on the Mechanical Response of Automotive Steel under High Strain Rates

Non-Associated Flow Rule Constitutive Modeling Considering Anisotropic Hardening for the Forming Analysis of Orthotropic Sheet Metal

Comparative Study and Application of a Coupled Nonlinear Kinematic Hardening Model for Structural Metallic Material Behavior

Ductile damage model for metal forming simulations including refined description of void nucleation

Simulations of Plastic Deformation by Anisotropic Hardening Yield Functions for QP1180

Methods of Accounting for Temperature and Strain Rate Variation in Multilevel Constitutive Models of Metal Deformation (Analytical Review)

A Multi-Phase Model for High Strength Steels

A modified kinematic hardening model considering hetero-deformation induced hardening for bimodal structure based on crystal plasticity

Modeling of the thermal softening of metals under impact loads and their temperature–time correspondence