Abstract:Raw materials for the production of polyurethane (PU), including polyols and isocyanate are derived from crude oils which pose multitude environmental impacts. While, the exploits of pure cooking oil, like palm oil used as a feedstock for polyol could cause bio-crisis, triggered by the imbalance of its demands and supplies. Hence, the utilization of vegetables or cooking oil from waste are mandatory to resolve the impacts. This study revolves around the comparative assessment of waste cooking oil (WCO) over pure cooking oil, as well as, the optimization of temperature, different acids and catalysts and hydrogen peroxide loading in the production polyol via epoxidation and hydroxylation reaction. An acid reacts with hydrogen peroxide, produces peroxy-acid and water, which then reacts with WCO, first step through the epoxidation process. Afterwards, to produce polyol the breaking of the epoxidized-ring fatty acids is carried out by the reaction of hydroxylation aided by catalyst i.e., hydrochloric acid, sulphuric acid or phosphoric acid. Notoriously, WCO have similar triglyceride structure as pure cooking oil. However, even after filtration, some factors have considerable effect on its fatty acid compositions such as duration of usage, exposure of temperature and type of food used during cooking. In regards to temperature when producing polyol, it is discovered that higher temperature led to more ring-opening, nonetheless, prolong high temperature causes more side reactions which is undesirable. Additionally, acetic acid has surpassing oxygen carrier properties over formic acid in epoxidation reaction. Alongside, sulphuric acid being the most efficient inorganic acid catalyst due to stronger acid exhibits profound ring-opening of epoxidized oil. Furthermore, higher loading of hydrogen peroxide is preferable. Lastly, variations of extraction of sustainable acids which can be used as oxygen carrier for epoxidation i.e., formic acid and acetic acid derived from empty fruit bunch and food wastes are also demonstrated.

Optimisation Of Fame Production From Waste Cooking Palm Oil With Koh Catalyst Supported On Palm Kernel Shells Ash (Pksa) Using Response Surface Methodology (Rsm)

Optimization of the Product Yields of the Pyrolysis of Palm Kernel Shell in a Fixed-Bed Reactor Using Response Surface Methodology (RSM)

Optimization of Volatile Fatty Acid Production with Co-Substrate of Food Wastes and Dewatered Excess Sludge Using Response Surface Methodology

Biomass to biofuel: Palm kernel shells as catalyst supports for enhanced biodiesel production

Parameters Optimization of Palm Oil Biodiesel Production at Various CaO Concentrations Using Response Surface Methodology

Process optimization for PHA production by activated sludge using response surface methodology

Optimization of reaction conditions for enzymatic synthesis of palm fatty hydrazides using response surface methodology

Optimisation of Epoxide Ring-Opening Reaction for the Synthesis of Bio-Polyol from Palm Oil Derivative Using Response Surface Methodology

Optimization of biodiesel production from waste cooking oil using α-Fe2O3/HAP catalyst via simultaneous esterification-transesterification reaction

Response Surface Methodology for the Synthesis and Characterization of Bio-Oil Extracted from Biomass Waste and Upgradation Using the Rice Husk Ash Catalyst

Optimization Using Response Surface Methodology (RSM) for Biodiesel Synthesis Catalyzed by Radiation-Induced Kenaf Catalyst in Packed-Bed Reactor

Comprehensive Optimisation of Biodiesel Production Conditions via Supercritical Methanolysis of Waste Cooking Oil

Fatty acid methyl ester production from acid oil using silica sulfuric acid: Process optimization and reaction kinetics

Esterification of Free Fatty Acid in Palm Oil Mill Effluent using Sulfated Carbon-Zeolite Composite Catalyst

Optimisation of Process Parameters to Maximise the Oil Yield from Pyrolysis of Mixed Waste Plastics

Production and optimisation of used cooking palm oil into protected fat calcium salts by fusion method using response surface methodology (RSM)

Comparative Study on Optimization of Factors Affecting Epoxidation-Hydroxylation Reaction for The Production of Waste Cooking Oil Based-Polyol

Multi-objective optimization of a novel crude lipase-catalyzed fatty acid methyl ester (FAME) production using low-order polynomial and Kriging models

Data on the derived mesoporous based catalyst for the synthesized of fatty acid methyl ester (FAME) from ternary oil blend: An optimization approach

Kinetic Parameters Investigation for The Esterification of Free Fatty Acid from Coconut Oil Mill Waste using Montmorillonite-Sulfonated Carbon from Glucose Composite Catalyst

Clean approach for catalytic biodiesel production from waste frying oil utilizing K 2 CO 3 /Orange peel derived hydrochar via RSM Optimization.