Abstract:for an Invited Paper for the MAR11 Meeting of The American Physical Society Carbon Nanotubes with Temperature Invariant Viscoelasticity from -196◦C to 1000◦C MING XU, Technology Research Association for Single Wall Carbon Nanotubes (TASC); AIST, Japan Viscoelasticity describes the ability of a material to possess both elasticity and viscosity. Viscoelastic materials, such as rubbers, possess a limited operational temperature range, (e.g., for silicone rubber: -55 to 300◦C) above which the material breaks down and below which the material undergoes a glass transition and hardens. This is because molecular motion that is the origin of viscoelasticity is a thermally activated process. We created a viscoelastic material composed from a random network of long interconnected carbon nanotubes that exhibited an operational temperature range from -196◦C to 1000◦C [1]. The viscoelastic properties (storage modulus, loss modulus, and damping ratio) measured by DMA in N2 ambient were nearly constant over an exceptionally wide temperature range (-140◦C∼600◦C). As exemplified by the vibration isolator demonstration, the CNT material showed viscoelasticity beyond the DMA limitation at -190◦C (immersed in liquid nitrogen) and at >900◦C (exposed to butane torch). And we implemented impact tests at -196◦C, 25◦C and 1000◦C using a steel ball and analyzed the ball tracks. The ball tracks were identical for all cases as observed by SEM and 3-D mapping that suggested unvarying viscoelastic properties across this 1200◦C temperature range. We interpret that the thermal stability stems from energy dissipation through the zipping and unzipping of carbon nanotubes at contacts. Quantitatively, the viscoelastic properties by DMA showed that the CNT material possessed similar stiffness (storage modulus 1MPa), higher dissipation ability (loss modulus (0.3MPa) and damping ratio (0.3) than silicone rubber at room temperature. Further DMA characterization from -140◦C to 600◦C demonstrated temperature invariant frequency stability (0.1-100Hz), the same level of reversible deformation (critical strain 5%) and fatigue resistance (1,000,000 cycles, 100Hz). [1] Xu, M.; Futaba, D. N.; Yamada, T.; Yumura, M.; Hata, K. Science (Accepted)

Viscoelastic Properties Of Silicone Rubber With Addition Of Carbon Nanotubes

Viscoelastic Damping Performance And Rheological Behaviour Of Cup-Stacked Carbon Nanotube Modified Epdxy Nanocomposites With Re-Agglomeration Network

EXPERIMENT STUDY OF RUBBER COMPOSITES FILLED WITH CARBON NANOTUBES--EFFECT OF DOSAGE OF CARBON NANOTUBES ON PROPERTY OF COMPOSITES

Thermal Conductivity Improvement Of Silicone Elastomer With Carbon Nanotube Loading

Static and dynamic mechanical properties of polydimethylsiloxane/carbon nanotube nanocomposites

Effect of graphite and its surface modification on thermal conductivity of silicone rubber

Molecular dynamics simulation of the effect of the thermal and mechanical properties of addition liquid silicone rubber modified by carbon nanotubes with different radii

Carbon Nanotubes with Temperature Invariant Viscoelasticity from - 196 ∘ C to 1000 ∘ C

Strain-sensitive electrical conductivity of carbon nanotube-graphene-filled rubber composites under cyclic loading.

Improved thermal stability of silicone rubber nanocomposites with low filler content, achieved by well-dispersed carbon nanotubes

Significant Temperature and Pressure Sensitivities of Electrical Properties in Chemically Modified Multiwall Carbon Nanotube/Methylvinyl Silicone Rubber Nanocomposites

The Effect of High Loaded Multiwall Carbon Nanotubes in Natural Rubber and Their Nonlinear Material Constants

Dynamic rheological studies of poly(p-phenyleneterephthalamide) and carbon nanotube blends in sulfuric acid.

The effect of carbon nanotubes loading and processing parameters on the electrical, mechanical, and viscoelastic properties of epoxy-based composites

Testing of Rubber Composites Reinforced with Carbon Nanotubes

Viscoelastic Properties of Nanosilica‐filled Epoxy Composites Investigated by Dynamic Nanoindentation

Effect of added silicon carbide nanowires and carbon nanotubes on mechanical properties of 0–3 natural rubber composites

Improving the Thermal and Mechanical Properties of an Alumina-Filled Silicone Rubber Composite by Incorporating Carbon Nanotubes

Tailoring Temperature Invariant Viscoelasticity of Carbon Nanotube Material

Electro- and Thermophysical Properties of Organosilicon Elastomers Modified with Carbon Nanotubes and Microscale Metallic Structures

Effect of Silica Nanotubes on the Property of LSR Microporous Composite Materials