Abstract:Morphology and surface property are critical property-defining factors for metal oxide catalysts, therefore, the rational engineering on these aspects is considered as the effective means to enhance their overall catalytic activities. In this work, a silicon oxide (SiO2) with hierarchical structure was successfully prepared and applied as carrier for the design of SiO2-supported copper oxide catalysts (CuO/SiO2-x, x represents treating temperature of SiO2 during preparation). The morphology and composition of thus-obtained catalysts were characterized by XRD, SEM, HRTEM, XPS, FTIR, contact angle and N2 adsorption. Interestingly, even with relatively large CuO particles, excellent activity was also achieved in hydrogenation of nitrophenol under relatively mild conditions (25ºC and 1atm). Over the optimal CuO/SiO2-800 catalyst, the 4-nitrophenol (4-NP) conversion reached 99% in 60 seconds and its hydrogenation rate was about 9.2 times that of bare CuO catalyst. Additionally, it could also be reused for at least eight times without obvious fading in efficiency. The excellent catalytic performance can be attributed to the synergy between surface-anchored structure in which more active sites can be exposed, and hydrophilic surface to promote the adsorption and diffusion of substrate molecules during hydrogenation process.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to improve the catalytic efficiency of nitrophenol compounds in hydrogenation under mild conditions. Specifically, the researchers designed and prepared a CuO/SiO_2 nano - catalyst with an anchoring structure and a hydrophilic surface, aiming to improve its activity and selectivity in the nitrophenol hydrogenation reaction by improving the microstructure and surface properties of the catalyst. In addition, the study also explored the recyclability of the catalyst to evaluate its potential for practical applications. The paper mentions that nitrophenol compounds are difficult to be converted into aminophenol under mild conditions due to their stable structural characteristics, which has caused a serious pollution problem to the environment. Therefore, the development of highly efficient catalysts is crucial for alleviating this problem. Through the rational design of the morphology and surface properties of the catalyst, this study has successfully improved the catalytic performance of the CuO/SiO_2 catalyst in the nitrophenol hydrogenation reaction, especially achieving a significant improvement in the conversion rate and reaction rate of 4 - nitrophenol. The experimental results show that the optimal CuO/SiO_2 - 800 catalyst achieved complete conversion of 4 - nitrophenol within 60 seconds, and its hydrogenation rate is about 9.2 times that of the bare copper oxide catalyst. In addition, this catalyst can still maintain high catalytic activity after at least eight cycles of use, showing good stability and reusability. Overall, this study not only provides a new solution for the effective treatment of nitrophenol compounds, but also provides theoretical basis and technical support for the design of high - performance non - precious metal catalysts.

Rational design of CuO/SiO2 nanocatalyst with anchor structure and hydrophilic surface for efficient hydrogenation of nitrophenol

Facile synthesis of holey lamellar CuO via ultrasonic chemical etching toward highly efficient hydrogenation of 4-nitrophenol under mild conditions

Facile Synthesis of Au Embedded CuOx-CeO2 Core/shell Nanospheres As Highly Reactive and Sinter-Resistant Catalysts for Catalytic Hydrogenation of P-Nitrophenol

A Flower-Cluster Heterogenous Structure Assembled by Ultrathin NiCo/NiCoOx-SiO2 Nanobelts with Stable Catalytic Performance

Novel Mesoporous Ag@SiO2 Nanospheres As a Heterogeneous Catalyst with Superior Catalytic Performance for Hydrogenation of Aromatic Nitro Compounds

A freestanding SiO 2 ultrathin membrane with NiCu nanoparticles embedded on its double surfaces for catalyzing nitro-amination.

High Photocatalytic Activity of Cu 2 O Embedded in Hierarchically Hollow SiO 2 for Efficient Chemoselective Hydrogenation of Nitroarenes

Synergistic Effect of Segregated Pd and Au Nanoparticles on Semiconducting SiC for Efficient Photocatalytic Hydrogenation of Nitroarenes.

In-situ Reactive Loading of Platinum Onto Tin Oxide Nanocrystals with Superior Catalytic Performance for Hydrogenation of 4-Nitrophenol

Insight into the Morphology-Dependent Catalytic Performance of CuO/CeO2 Produced by Tannic Acid for Efficient Hydrogenation of 4-Nitrophenol

Fabrication of Highly Stable Metal Oxide Hollow Nanospheres and Their Catalytic Activity Toward 4-Nitrophenol Reduction.

Nanostructured Ni-MoCx: An efficient non-noble metal catalyst for the chemoselective hydrogenation of nitroaromatics

Pd Atomic Engineering of Nanoporous Ni/NiO for Efficient Nitrophenol Hydrogenation Reaction

Optimization of Cu catalysts for nitrophenol reduction, click reaction and alkyne coupling

NiO x -promoted Cu-based catalysts supported on AlSBA-15 for chemoselective hydrogenation of nitroarenes

Preparation of Ni-Cu-C Composite Catalysts Prepared from Mixed Nickel and Copper Hydroxides for Selective Hydrogenation of 4-Nitrophenol

Efficient hydrogenation catalyst designing via preferential adsorption sites construction towards active copper

ZrO2-x modified Cu nanocatalysts with synergistic catalysis towards carbon-oxygen bond hydrogenation

Ni–MoO2 heterostructure encapsulated in mesoporous silica microtubes: a structured hydrogenation catalyst with enhanced activity for reduction of 4-nitrophenol

Designing of Co3O4/N-doped carbon and Co-Co3O4/N-doped carbon nanomaterials via sol-gel route with unexpected high catalytic performances toward hydrogenation reduction of 4-Nitrophenol

Synergizing the Cu-only Catalyst with the Amino-Modified Mesoporous Double-Shelled Nanoreactor for the Selective Transfer Hydrogenation of Nitriles