Abstract:Compressor surge is a typical unstable phenomenon generally resulting in violent aerodynamic oscillation in a compression system. Because of the hysteresis caused by the unsteady flow behaviors during the surge cycle in a compression system, some aerodynamic properties show clear distinctions with altered streamwise positions. In order to obtain the transient surge characteristics accurately in the experiment, the probes should be reasonably positioned along the streamwise positions. In this paper, a one-dimensional-three-dimensional (1D-3D) coupled method is used to study the streamwise variance of aerodynamic properties during the surge process in the compression system including a centrifugal compressor and downstream pipe system. The results show that for the mass flow rate, the surge amplitude decreases gradually along the downstream pipe. In contrast, the amplitude of the mid-frequency mass flow fluctuation caused by pressure wave propagation increases firstly and then decreases. For unsteady pressure characteristics, the amplitude of pressure oscillation during the surge cycle along the downstream pipe system is almost the same. For temperature characteristics, when the surge occurs, the strength of reverse flow increases dramatically, which makes the temperature increment near the casing wall at the compressor inlet come up to 60.6% of the temperature before surge inception, also the temperature increment is faster than the pressure response at compressor outlet. The variance analysis concerning aerodynamic properties along the streamwise direction of a compression system can provide the following guidance for engineering practice of surge test or monitoring: the transient mass flow probe should be placed close to the compressor outlet in order to obtain the dynamic mass flow characteristics more accurately, and the distance between pressure sensors and compressor outlet has little influence on the accuracy of dynamic pressure measurement in a surge cycle. Moreover, the surge inception can be judged accurately and quickly by placing high-frequency temperature sensors on the casing at the compressor inlet.

Effect of the distribution of the upstream probe support on performance of compressor cascade

Performance Sensitivity Analysis and Aerodynamic Optimization of Compressor Cascades by a Turbulence Adjoint Method

Experimental Investigation of the Transonic Shock Oscillation Characteristics in a Heavy-Duty Gas Turbine Compressor Cascade

Experimental study on the effect of fluidic oscillator jet position on the performance of a high speed compressor cascade

Experiment and Numerical Simulation of the Performance on Scaled Compressor Cascade and Development of a Prediction Model

Flow quality improvement of the wind tunnel testing for a highly-loaded compressor cascade at high incidence

Aerodynamic Design Method and Experimental Investigation of a High-Load Supersonic Compressor Cascade

Numerical Simulation of Effect of Blade End Slot on Performance of Compressor Cascade

Effect investigation of single-slotted and double-slotted configurations on the corner separation and aerodynamic performance in a high-load compressor cascade

Study on the influence of pneumatic probe on the wake flow field of transonic turbine cascade

Compressibility Effects On The Two Generations Of Unsteady Flow Types In Axial Flow Compressors

Numerical Investigation of Wall Heating/Cooling Effect on the Transonic Compressor Performance

Experimental study on multi-angle pulsed jet actuators for controlling corner separation flow in a compressor cascade

Investigation on Probe Streamwise Distribution for Surge Measurement in Compression System

Effect of Leakage Flow on the Endwall Cooling Performance in High Subsonic Turbine Cascade

Influence of backward-facing step (BFS) on three-dimensional flow behavior in transonic compressor cascade

Interaction mechanism between the tip leakage flow and inlet boundary layer in a highly loaded compressor cascade based on scale-adaptive simulation

Experimental Study on Performance of Transonic Compressor Cascade with Microgroove Polyurethane Coatings

Investigation of transition flow on suction surface of highly loaded compressor cascade controlled by plasma actuator

Study of Circumferential Grooved Casing Treatment on Cascade Aerodynamic Performance

Effects of Number of Bleed Holes on Shock-Wave/Boundary-Layer Interactions in a Transonic Compressor Stator