Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Pore-based architecture and representative element volume evaluation in artificial sand packs and natural rock cores

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Critical REV Size of Multiphase Flow in Porous Media for Upscaling by Pore-Scale Modeling

Influence of pore structures on the mechanical behavior of low-permeability sandstones: numerical reconstruction and analysis

Analysis Method of Full-Scale Pore Distribution Based on MICP, CT Scanning, NMR, and Cast Thin Section Imaging—A Case Study of Paleogene Sandstone in Xihu Sag, East China Sea Basin

Pore‐Scale Reconstruction and Simulation of Non‐Darcy Flow in Synthetic Porous Rocks

Quantitative evaluation of pore structure from mineralogical and diagenetic information extracted from well logs in tight sandstone reservoirs

Multi-Scale Quantitative Characterization of Pore Distribution Networks in Tight Sandstone by Integrating FE-SEM, HPMI, and NMR with the Constrained Least Squares Algorithm

Pore Structure Characterization of Tight Sandstones Via a Novel Integrated Method: A Case Study of the Sulige Gas Field, Ordos Basin (northern China)

Effects of Pore Structure on Stress-Dependent Fluid Flow in Synthetic Porous Rocks Using Microfocus X-ray Computed Tomography

Pore-network model to quantify internal structure and hydraulic characteristics of randomly packed grains with different morphologies

Fine characterization of spatial pore structure of Nanjing silty sand using micro-CT

Research on the microscopic pore-throat structure and reservoir quality of tight sandstone using fractal dimensions

Research and analysis of the impact of the pore structure on the mechanical properties and fracture mechanism of sandstone

Quantitative analysis of pore structure and permeability characteristics of sandstone using SEM and CT images

Quantitative Characterization of Tight Rock Microstructure of Digital Core

3D Printing of natural sandstone at pore scale and comparative analysis on micro-structure and single/two-phase flow properties

Pore-scale Investigations of Permeability of Saturated Porous Media: Pore Structure Efficiency

Size Effect on Pore-Scale Variables and Heterogeneous Pore-Network Characteristics in Carbonate Rocks

Numerical Upscaling of Nonlinear Flow in Low-Permeability Sandstone Matrix System

Research on the Reconstruction Method of Porous Media Using Multiple-Point Geostatistics