Eco-friendly removal of methyl tert-butyl ether from contaminated water using steam and CO2-activated carbons

M. Bakry,W. I. El-Azab,A. El-Fiqi,M. A. Ebiad
DOI: https://doi.org/10.1007/s13762-023-05431-5
2024-01-17
International Journal of Environmental Science and Technology
Abstract:Petrol frequently contains the additive methyl tertiary butyl ether (MTBE). Because of its significant health risks, MTBE pollution of surface and ground water is a severe concern for the environment. Highly porous physically activated carbons, particularly CO 2 -activated carbon (CO 2 -AC) and steam-activated carbon (Steam-AC), were obtained from date stones as potential eco-friendly adsorbents for MTBE from contaminated water. The chemical composition, microstructure, textural, and structural characteristics of adsorbents were characterised by elemental analysis, SEM, N 2 sorption, XRD, and FTIR. The adsorption process evaluation based on the initial MTBE concentration, liquid-to-solid ratio, and equilibrium contact time. CO 2 -AC and steam-AC adsorbents have high surface areas of 819.5 m 2 /g, and 567.7 m 2 /g, respectively. At 40 °C, CO 2 -AC has an adsorption capability of 181.36 mg/g. The adsorption result was best fitted by the Freundlich model. The two-step intraparticle diffusion process prevailed the adsorption process, and the pseudo-second-order model presented an optimal fit for the adsorption kinetics models. Spontaneous physical adsorption was endothermic when CO 2 -AC adsorbs at 40 °C because ∆ G was − 6.34 kJ/mol. Finally, the water quality improved and the salt content, the alkalinity, and the hardness decreased with the use of CO 2 -AC as an environmentally friendly adsorbent for removing MTBE from the polluted water.
environmental sciences
What problem does this paper attempt to address?
The problem this paper attempts to address is: the removal of methyl tert-butyl ether (MTBE) from contaminated water. The paper mentions that MTBE is a commonly used gasoline additive, but due to its potential hazards to the environment and human health, MTBE contamination of surface water and groundwater has become a serious environmental issue. Because MTBE has limited soil adsorption, high water solubility, and slow biodegradability, it easily infiltrates into groundwater. Therefore, developing effective removal methods is crucial for protecting water resources and human health. To this end, researchers used date pits as raw materials and prepared physically activated carbon (specifically CO2 activated carbon and steam activated carbon) through steam and carbon dioxide activation methods. They evaluated the effectiveness of these activated carbons as eco-friendly adsorbents for removing MTBE from contaminated water. The study included characterization of the chemical composition, microstructure, texture, and structural properties of the adsorbents, as well as an evaluation of the adsorption process based on initial MTBE concentration, liquid-solid ratio, and equilibrium contact time.