Abstract:Carbon fiber reinforced polymers (CFRP) laminates are extensively employed to manufacture the deployable composite thin-walled lenticular tubes (CTLTs). This paper presents a comparison of experimental and numerical and analytical results of compressive and tensile flattening types of deployable CTLTs. Firstly, a compressive flattening model created by ABAQUS was introduced to obtain its strain and stress of each ply of composite tube. Secondly, compressive flattening experiments were performed for CTLT specimens to explore compressive flattening mechanism of CTLTs. Then, the numerical simulation methods to simulate the compressive flattening of CTLTs were verified by comparing measurements and corresponding numerical results. Thirdly, analytical models are employed to predict the flattening process of CTLTs under compression. Lastly, for the tensile flattening process of CTLTs, the numerical simulation method and corresponding experiments and theoretical results are respectively also carried out with aim of revealing mechanical properties of CTLTs under tension. The flattening process of CTLTs can be considered to be a nonlinear deformation and small strain process. For the compressive flattening, the maximum compressive force, displacement and strain are 98N, 60mm and 0.29%, respectively. For the identical tensile flattening, the maximum tensile force, displacement and strain are 550N, 42.5mm, 0.53%. respectively. It is found that the compressive flattening way is a better choice in the design of the actuated mechanism.

Theoretical modelling and optimization of the plateau force of tubular anti-tetrachiral structures

Extensible Beam-Like Metastructures at the Microscale: Theoretical and Modified Hencky Bar-Chain Modeling

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

On the collapse stress of tubular enhanced anti-tetra-missing rib structure

Metastructure with Torsion-Compression Coupling Behaviors: Additive-manufacturing, Experimental and Numerical Investigations

A Study of Flattening Process of Deployable Composite Thin-Walled Lenticular Tubes under Compression and Tension

Tunable compression-torsion coupling effect in novel cylindrical tubular metamaterial architected with boomerang-shaped tetrachiral elements

A novel 3D tetra-missing rib auxetic meta-structure with tension/compression-twisting coupling effect

Bioinspired Golden Spiral Shapes on Crushing Protection Behaviors of Tubular Structures

A Novel Multi-Cell Square Tubal Structure Based on Voronoi Tessellation for Enhanced Crashworthiness

Frusta structure designing to improve quasi-static axial crushing performances of triangular tubes

Experimental and Numerical Analysis of a Novel Assembled Auxetic Structure with Two-Stage Programmable Mechanical Properties

In-plane compression behavior of meta-tetrachiral and common auxetic structures

In Plane Mechanical Properties of Tetrachiral and Antitetrachiral Hybrid Metastructures

Out-of-plane deflection of plate-like metastructures in tension due to corrugation asymmetry

Axial Crushing Theory and Optimization of Lattice-Filled Multicellular Square Tubes

Design and Optimization of a Tri-prism Deployable Membrane Support Arm Using Lenticular Collapsible Composite Tubes

Finite Strain Topology Optimization with Nonlinear Stability Constraints

Integrated design and additive manufacturing of lattice-filled multi-cell tubes

Theoretical, Numerical, and Experimental Study on Quasi-static Compressive Behaviors of Elliptical Anti-chiral Auxetic Structure