Abstract:In practical applications, industrial cranes may exhibit double-pendulum swing effects, due to many factors, such as large payload scales and non-negligible hook masses. Currently, for double-pendulum cranes, most available methods are open-loop controllers designed based on linearized crane dynamics; even for existing closed-loop approaches, they are also mostly developed using linearized dynamics and require the exact knowledge of system parameters, which makes them sensitive to parametric uncertainties. To handle these issues, we present an adaptive antiswing control strategy for crane systems with double-pendulum swing effects and uncertain/unknown parameters, which can make the trolley accurately reach the target position with reduced overshoots and effectively eliminate the double-pendulum swing angles at the same time. A complete stability analysis, based upon the full nonlinear dynamics (i.e., without linearizing the dynamics), is included to support the theoretical derivations. We present hardware experimental results to demonstrate that the proposed controller achieves better performance than existing ones and exhibits good robustness. Note to Practitioners—This paper is motivated by the issue of controlling a crane system when double-pendulum swing effects are excited and present. The double-pendulum effects can happen in many practical scenarios and make the crane manual operation very challenging. Moreover, most existing crane control approaches are developed based upon single-pendulum crane models and they may not work normally in the presence of the double-pendulum phenomenon. In addition, usually, the model parameters, including rope length and trolley/hook/payload masses, are not exactly known in practice, which may badly degrade the performance of the control approaches requiring exact model knowledge. Toward this end, we suggest a new control method for cranes suffering from double-pendulum effects to achieve satisfactory performance. The presented control method is robust against parametric uncertainties and it can suppress the double-pendulum swing, reduce the trolley overshoots, and improve the efficiency. Preliminary physical experiments carried out on a double-pendulum crane hardware test bed indicate the effectiveness of the proposed method. In our future work, we will apply the suggested control approach to industrial crane systems to improve their working efficiency.

Adaptive Event-Triggered Vibration Control for Crane Bridge System With Trolley

Modeling and vibration suppression for overhead crane in planar space with nonlinear time-varying actuator faults and uncertain control directions

Research on adaptive coupling trajectory tracking anti-swing control strategy for three-dimensional double-pendulum overhead crane

Nonlinear Antiswing Control for Crane Systems With Double-Pendulum Swing Effects and Uncertain Parameters: Design and Experiments

Modeling and energy-based sway reduction control for tower crane systems with double-pendulum and spherical-pendulum effects

Research on Swing Model and Fuzzy Anti Swing Control Technology of Bridge Crane

Control Of Underactuated Bridge Cranes: A Simplified Ida-Pbc Approach

Adaptive Tracking Control for Underactuated Double Pendulum Overhead Cranes with Variable Cable Length

Adaptive Control of Two-Pendulum Suspension of Overhead Crane

Rapid and restricted swing control via adaptive output feedback for 5-DOF tower crane systems

Adaptive sliding mode anti-swing control of 4-DOF tower crane based on a nonlinear disturbance observer

Fixed-Time Event-Triggered Control for a Building-Like Structure With Prescribed Performance

Tangent barrier Lyapunov function based adaptive event-triggered control for uncertain flexible beam systems

A single and double closed-loop compound anti-sway control method for double-pendulum bridge cranes locating at random position

Swinging Motion Control Of Suspended Structures: Principles And Applications

Model‐reference adaptive and self‐tuning controls of telescopic mobile cranes with the impact of elastic cables, viscoelastic cylinders, and winds

The Prescribed-Time Sliding Mode Control for Underactuated Bridge Crane

Random crowd-induced vibration in footbridge and adaptive control using semi-active TMD including crowd-structure interaction

Robust sliding-mode control for a gantry crane system subject to external disturbance

Sliding Mode Control with a Prescribed-Time Disturbance Observer for Bridge Crane Positioning and Anti-Swing

Modeling and vibration suppression based on Nussbaum function for beam bridge with unknown control directions and unknown nonlinear time-varying actuator faults