Abstract:The operating voltage of electrochemical capacitor (EC) in aqueous medium is considerably limited due to the theoretical stability of water (1.23V). Hence, the delivered energy density of such systems is restricted compared to that of batteries. A traditional approach to tackle this issue is to focus on improving the capacitance rather than the working voltage of ECs. Especially, combining traditionally used carbons with pseudocapacitive materials has been investigated by many researchers. Adopting this strategy improves the delivered capacity of the system, but key metrics such as a power performance and cycle life of ECs may face a serious failure. The slow nature of faradaic reactions affects the frequency response, while the parasitic activities downgrades the favorable cyclability of the device. Hence, a realistic pathway to improve the energy performance of ECs must be taken. Transition metal carbides, carbonitrides, and nitrides (MXenes) are a new family of 2D layered materials. They have the general formula of M n+1 X n , in which M indicates the transition metal, like Ti, Mo, Nb, etc., and X is carbon or nitrogen. Considering favorable properties such as a high conductivity and the ability of cation intercalation, many ECs designs based on MXenes have been reported. Nevertheless, there is a lack of clear elucidation of the charge storage mechanism in these materials. Here, the interface of electrode-electrolyte was studied to gain a better insight into the hydrogen storage mechanism and overpotential of MXenes (Ti 3 C 2 T x ) in acidic and neutral media. It has been found that MXene-based ECs are suffering from an unbalanced capacitive performance between negative and positive electrodes. Especially, a low capacitance in the positive potential range limits the cell voltage to 0.8V and 1.3V in 1M H 2 SO 4 and 1M Li 2 SO 4 , respectively. To extend the cell voltage, self-standing composites based on 3D graphene and Ti 3 C 2 T x were designed. Interestingly, it was observed that during the negative polarization, a significant redox couple activity was observed at the surface of 3DG/ Ti 3 C 2 T x composite electrode. The working potential of the positive electrode was enlarged using micro/mesoporous Black Pearl (BP2000) as electrode material. The realized asymmetric cell was operated in a wider potential window. A higher expansion was realized after balancing the charge of both electrodes. The addition of redox-active salt (KI) to the electrolyte medium improved the capacitive performance of the positive electrode, due to the activity of iodide/iodine species. Excessive increase of the positive electrode capacity was further equalized by balancing the mass of electrodes. In the neutral medium, an asymmetric design of the cell based on Ti 3 C 2 T x (negative electrode) and BP2000 (positive electrode) allowed the cell to operate in a broad range of voltage (up to 2V) with a stable cycling (more than 7000 cycles). The prepared electrodes were characterized using different physiochemical techniques, including XRD, XPS, BET, and SEM analyses. For the electrochemical characterization in two and three-electrode cells, electrodes in the form of pellets or self-standing discs were utilized. The performance of EC cells was studied by cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy.

Machine Learning‐Assisted Survey on Charge Storage of MXenes in Aqueous Electrolytes

MXene-transition Metal Sulfide Composite Electrodes for Supercapacitors: Synthesis and Electrochemical Characterization

MXene as a Charge Storage Host

Probing the electrochemical capacitance of MXene nanosheets for high-performance pseudocapacitors.

High-Capacitance Mechanism for Ti3C2Tx MXene by in Situ Electrochemical Raman Spectroscopy Investigation.

High-Rate Electrochemical Energy Storage of MXene in Neutral Aqueous Electrolytes

Two-dimensional MXenes for electrochemical capacitor applications: Progress, challenges and perspectives

Predicting the Pseudocapacitive Windows for MXene Electrodes with Voltage-Dependent Cluster Expansion Models

Organic-inorganic all-pseudocapacitive asymmetric energy storage devices

。。。

MXenes serving aqueous supercapacitors: Preparation, energy storage mechanism and electrochemical performance enhancement

Intercalation in Two‐Dimensional Transition Metal Carbides and Nitrides (MXenes) toward Electrochemical Capacitor and Beyond

Electrochemical Properties of Mo4VC4Tx MXene in Aqueous Electrolytes

High Energy Density of Two-Dimensional MXene/NiCo-LDHs Interstratification Assembly Electrode: Understanding the Role of Interlayer Ions and Hydration

The Electrode/Electrolyte Interface in MXene-Based Electrochemical Capacitors

Unveiling the Energy Storage Mechanism of MXenes under Acidic Conditions through Transitions of Surface Functionalizations

Unraveling the Ionic Storage Mechanism of Flexible Nitrogen‐Doped MXene Films for High‐Performance Aqueous Hybrid Supercapacitors

Recent Advances in Two-Dimensional MXene for Supercapacitor Applications: Progress, Challenges, and Perspectives

Selectivity for intercalated ions in MXene toward a high-performance capacitive electrode

Unraveling the Charge Storage Mechanism of Ti 3 C 2 T x MXene Electrode in Acidic Electrolyte

Electrostatic‐Assembled MXene@NiAl‐LDHs Electrodes with 3D Interconnected Networks Architectures for High‐Performance Pseudocapacitor Storage