Abstract:Water electrolyzers, such as proton exchange membrane water electrolyzers (PEM) and anion exchange membrane water electrolyzers (AEM) are important technologies for sustainable electrochemical energy conversion. The oxygen evolution reaction (OER) at the anode is a pivotal half-reaction in these systems. Despite substantial progress over the years, OER kinetics remain a major source of inefficiency in these devices, necessitating the development of stable catalysts. Currently, precious metal-based catalysts dominate the landscape of OER catalysts for these devices. As non-precious alternatives, nickel-iron (Ni/Fe) catalysts have emerged as particularly promising in alkaline conditions. However, they exhibit dynamic behavior during electrocatalysis—for instance, oxidizing to an active oxyhydroxide phase during the OER. This dynamic nature makes it challenging to establish clear structure-activity-stability relationships. Incorporating cobalt (Co) into the catalyst composition has been found to influence the activity and material conversion of mixed Ni-Fe-Co oxides and (oxy)hydroxides. Methods for rationally activating and stabilizing Ni-Fe-based catalysts via electrochemical and chemical (e.g. composition) routes are necessary for enhancing scalability and accessibility in hydrogen production devices. Herein, our goal is to understand and exploit activation protocols to enhance the OER performance of as-synthesized nickel-iron-cobalt metal thin films, addressing three primary objectives: synthesizing and characterizing homogeneous metal catalysts, investigating the impact of different potential ranges and scan rates on catalyst oxidation and surface conversion from the metal, and assessing how the addition of cobalt influences conversion rates and current density of the catalyst. We use cyclic voltammetry to facilitate and disentangle conversion (integrated reductive peak for Ni and/or Co 2+ → 3+ transition) and OER performance (current density (mA cm -2 ) at η = 350 mV). For all compositions tested of (Ni 80 Fe 20 ) 100-x Co x , x = 0 - 5 % we observe that the most effective conversion requires both redox and oxygen evolution. To further investigate the relationship between conversion and performance catalysts were tested in varying electrolytes such as 1M KOH, 0.1M KOH, and an ionomer overlayer to understand how these impacted conversion. Subsequently, post-analysis techniques such as X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma mass spectrometry optical emission spectroscopy (ICP-OES) were conducted to gain insights into the surface composition and elemental distribution of the catalysts following potential cycling. Additionally, electrochemical mass spectrometry (EC-MS) was employed to quantify the faradaic efficiency of oxygen, providing an understanding of at what point the catalyst begins converting and how much of the OER current is directed towards OER versus metal conversion. This project advances the fundamental understanding of NiFeCo catalyst conversion, shedding light on the critical role of catalyst composition and investigating the conditions that foster optimal conversion efficiency. The use of physical vapor deposition for thin film catalysts offers distinct advantages, making deposition and scaling processes facile. This capability, coupled with the gained insights into conversion dynamics, sets the stage for in situ optimization of the surface to achieve the active oxyhydroxide phase with the highest performance for AEM water electrolysis.

OER properties of Ni–Co–CeO 2 /Ni composite electrode prepared by magnetically induced jet electrodeposition

Nickel Oxide/nickel Nanohybrids for Oxygen and Hydrogen Evolution in Alkaline Media

Fabrication of NiCo@Ni3S2/Nickel foam electrocatalyst with ultrathin NiCo layered double hydroxide film wrapping Ni3S2 nanoarrays for efficient oxygen evolution reaction

Electrocatalytic Performance of Micro–Nano-Nickel Electrodes via Magnetic Field-Assisted Jet Electrodeposition Method

Tuning Wettability of Nickle-based Electrode by Micro-Nano Surface Structure to Boost OER Catalysis

Composition-Dependent Dynamics of Nickel-Iron-Cobalt Metal Catalysts for Oxygen Evolution Reaction

Synthesis of a Nanoporous Oxygen-Vacancy-Rich Iron-Nickel Double Hydroxide Composite as a High-Performance Electrocatalyst for Oxygen Evolution Reaction

Controlled synthesis of Fe-Ni-S@CoSe 2 on nickel foam as an efficient electrocatalyst for oxygen evolution reaction

An efficient and stable MnCo@NiS catalyst for oxygen evolution reaction constructed by a step-by-step electrodeposition way

Construction of an Electrode with Hierarchical Three-Dimensional NiFe-oxyhydroxides by Two-Step Electrodeposition for Large-Current Oxygen Evolution Reaction

Bicontinuous Nanoporous Nitrogen/Carbon-Codoped FeCoNiMg Alloy as a High-Performance Electrode for the Oxygen Evolution Reaction

Engineered oxidation states in NiCo2O4@CeO2 nanourchin architectures with abundant oxygen vacancies for enhanced oxygen evolution reaction performance

Electrochemical Deposited Amorphous Bimetallic Nickle-Iron (oxy)hydroxides Electrocatalysts for Highly Efficient Oxygen Evolution Reaction

FeNi/Ni2P nanoparticles encapsulated in nitrogen-doped porous carbon: efficient electrocatalysts for oxygen evolution reaction

Unveiling the Role of Electrocatalysts Activation for Iron‐Doped Ni Oxyhydroxide in Enhancing the Catalytic Performance of Oxygen Evolution Reaction

Metallic nickel anchored on amorphous nickel cobalt oxide nanorods as efficient electrocatalysts toward oxygen evolution reaction

Interfacial electronic regulation on NiCo2O4 nanowires@NiFe-LDH nanosheets heterostructure for efficient oxygen evolution

Nickel-Cobalt-Iron Ternary Layered Double Hydroxide Nanoarrays for Superior Performance of Electrocatalytic Water Splitting

In Situ Electrochemical Activation of a Codoped Heterogeneous System as a Highly Efficient Catalyst for the Oxygen Evolution Reaction in Alkaline Water Electrolysis

A low‐cost Ni‐Mo electrocatalyst for highly efficient hydrogen and oxygen evolution reaction

Construction of NiCo2S4/Fe2O3 hybrid nanostructure as a highly efficient electrocatalyst for the oxygen evolution reaction