Effect of current density on denitrification performance and microbial community spectra in a pyrite-oxidizing bioelectrochemical system (PBES)

Zhixing Xiao,Dong Wang,Ting Xia,Huifang Wu,Dan Chen

DOI: https://doi.org/10.1016/j.jwpe.2021.102110

IF: 7

2021-08-01

Journal of Water Process Engineering

Abstract:A lab-scale system (PBES) combined electrolysis hydrogenotrophic denitrification and pyrite-oxidizing denitrification was established to evaluate the effect of current density on nitrate removal performance and community dynamics. Results indicated that the optimal NO3 −-N removal efficiency with lowest NO2 −-N accumulation was obtained when current density was 0.10 mA/cm2, a higher current density did not promote NO3 −-N removal. The activities of nitrate reductase and nitrite reductase in both the cathode biofilm and pyrite biofilm showed similar variation trend with that of NO3 −-N removal. The estimated contribution of hydrogenotrophic denitrification (23.77 %–43.53 %) was lower than that of pyrite-oxidizing denitrification (58.19 %–76.23 %) in the PBES. Illumina MiSeq sequencing indicated that microbial diversity of cathode biofilm increased with current density increased from 0.05 to 0.10 mA/cm2, then ceased to increase at a higher current density, whereas the microbial diversity of pyrite biofilm continuously increased along with increased current density. Azoarcus may be the key player for nitrate removal in both cathode and pyrite biofilms. Our results can provide useful information to improve PBES designs for the future applications.

engineering, chemical, environmental,water resources

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the influence of current density on the nitrate removal performance and microbial community composition in the pyrite - oxidized bioelectrochemical system (PBES). Specifically, the researchers hope to determine the nitrate removal efficiency of the PBES system and the dynamic changes of the microbial community under different current densities through experiments, so as to optimize the system design and improve the efficiency of treating nitrate - containing wastewater. The study focuses on the following aspects:

1. **Nitrate removal performance**: Evaluate the removal effect of the PBES system on nitrate under different current densities (0.05 mA/cm², 0.10 mA/cm², 0.20 mA/cm² and 0.30 mA/cm²), including the concentration changes and removal rates of nitrate (NO₃⁻ - N) and nitrite (NO₂⁻ - N).

2. **Microbial community structure**: Analyze the changes in microbial diversity and dominant flora on the cathode biofilm and pyrite biofilm under different current densities by high - throughput sequencing technology.

3. **Enzyme activity**: Measure the activities of nitrate reductase (NR) and nitrite reductase (NIR) in the cathode biofilm and pyrite biofilm under different current densities to evaluate the denitrification activity of microorganisms.

4. **Hydrogen production and utilization**: Evaluate the amount of hydrogen produced by the system under different current densities and its influence on the hydrogen - autotrophic denitrification process.

The research results show that when the current density is 0.10 mA/cm², the nitrate removal efficiency is the highest and the nitrite accumulation is the least. Further increasing the current density will not significantly improve the nitrate removal efficiency, but may inhibit the activity of microorganisms. In addition, the study also found that the contribution of pyrite - oxidized autotrophic denitrification to nitrate removal is higher than that of hydrogen - autotrophic denitrification, and Azoarcus may be the key nitrate - removing strain. These findings have important guiding significance for the future design and application of PBES.