Abstract:Tomographic synthetic aperture radar (TomoSAR) produces 3-D point clouds with unavoidable noise or false targets that seriously deteriorate the quality of 3-D images and the building reconstruction over urban areas. In this paper, a Hough transform was adopted to detect the outline of a building; however, on one hand, the obtained outline of a building with Hough transform is broken, and on the other hand, some of these broken lines belong to the same segment of a building outline, but the parameters of these lines are slightly different. These problems will lead to that segment of a building outline being represented by multiple different parameters in the Hough transform. Therefore, an unsupervised clustering method was employed for clustering these line parameters. The lines gathered in the same cluster were considered to correspond to a same segment of a building outline. In this way, different line parameters corresponding to a segment of a building outline were integrated into one and then the continuous outline of the building in cloud points was obtained. Steps of the proposed data processing method were as follows. First, the Hough transform was made use of to detect the lines on the tomography plane in TomoSAR point clouds. These detected lines lay on the outline of the building, but they were broken due to the density variation of point clouds. Second, the lines detected using the Hough transform were grouped as a date set for training the building outline. Unsupervised clustering was utilized to classify the lines in several clusters. The cluster number was automatically determined via the unsupervised clustering algorithm, which meant the number of straight segments of the building edge was obtained. The lines in each cluster were considered to belong to the same straight segment of the building outline. Then, within each cluster, which represents a part or a segment of the building edge, a repaired straight line was constructed. Third, between each two clusters or each two segments of the building outline, the joint point was estimated by extending the two segments. Therefore, the building outline was obtained as completely as possible. Finally, taking the estimated building outline as the clustering center, supervised learning algorithm was used to classify the building cloud point and the noise (or false targets), then the building cloud point was refined. Then, our refined and unrefined data were fed into the neural network for building the 3-D construction. The comparison results show the correctness and the effectiveness of our improved method.

KD-Tree-Based Euclidean Clustering for Tomographic SAR Point Cloud Extraction and Segmentation

Hough Transform and Clustering for a 3-D Building Reconstruction with Tomographic SAR Point Clouds

Urban SAR Tomography With Z-Structure Constraint of Buildings

Reconstructing 2-D/3-D Building Shapes from Spaceborne Tomographic Synthetic Aperture Radar Data

Geometric constraints based 3D reconstruction method of tomographic SAR for buildings

Building point cloud reconstruction in TomoSAR based on deep learning semantic segmentation

Enhanced TomoSAR imaging method with complex least squares for 3D building reconstruction

Automatic Regularization of TomoSAR Point Clouds for Buildings Using Neural Networks

Surface Extraction and Boundary Detection Based on DBSCAN Clustering in 3D Point Clouds

Morphology Regularization for TomoSAR in Urban Areas With Ultrahigh-Resolution SAR Images

Array 3-D SAR Tomography Using Robust Gridless Compressed Sensing

Prior elevation range based tomographic SAR imaging for urban building

Spatial Shift Phenomenon Compensation for TomoSAR Imaging Using High-Resolution TerraSAR-X Data

3D Surface Segmentation from Point Clouds Via Quadric Fits Based on DBSCAN Clustering

URBAN 3D RECONSTRUCTION OF VHR SAR IMAGES USING ITERATIVE OPTIMIZATION ALGORITHM AND LAYOVER FIXED-ORDER MODEL

Non-Local SAR Tomography for Large-Scale Urban Mapping

Tomo-Genesis: Dlr'S Tomographic Sar Processing System

Urban Surface Reconstruction in SAR Tomography by Graph-Cuts

Automatic Feature-Based Geometric Fusion of Multiview TomoSAR Point Clouds in Urban Area

Spaceborne TomoSAR and Beyond: from SAR Image Stacks to Objects

A Novel Method for Building Contour Extraction Based on CSAR Images