Abstract:Abstract Variable speed operation of the train cause easily the wheel-track slipping phenomenon, inducing strong nonlinear dynamic behavior of the suspended monorail train and bridge system (SMTBS), especially under an insufficient wheel-track friction coefficient. To investigate the coupled vibration features of the SMTBS under variable speed conditions, a novel 3D train–bridge interaction model for the monorail system considering nonlinear wheel-track slipping behavior is developed. Firstly, based on the D’Alembert principle, the vibration equations of the vehicle subsystem are derived by adequately considering the nonlinear interactive behavior among the vehicle components. Then, a high-efficiency modeling method for the large-scale bridge subsystem is proposed based on the component mode synthesis (CMS) method. The vehicle and bridge subsystems are coupled with a spatial wheel-track interaction model considering the nonlinear wheel-track sliding behavior. Furtherly, by a comprehensive comparison with the field test data, the effectiveness of the proposed method is verified, as well as the reasonable modal truncation frequencies of the bridge subsystem are determined. On this basis, the dynamics performances of the SMTBS are evaluated under different initial braking speeds and wheel-track interfacial adhesion conditions; besides, the nonlinear wheel-track slipping characteristics and their influences on the vehicle–bridge interaction are also revealed. The analysis results indicate that the proposed model is reliable for investigating the time-varying dynamic features of SMTBS under variable train speeds. Both the axle load transfer phenomenon and longitudinal slip of the driving tire would be easy to appear under the braking condition, which would significantly increase the longitudinal vehicle–bridge dynamic responses. To ensure a good vehicle–bridge dynamics performance, it is suggested that the wheel-track interfacial friction coefficient is larger than 0.35.

Development and Testing of a Friction-Driven Forestry Electric Monorail Car

Control System for the Mountainous Orchard Electric-Drive Monorail Transporter

Research on parameter optimization based on multi-body dynamics model of monorail vehicle aiming at reducing running wheel wear

Mechanics Modeling and Simulation Analysis of a Novel Articulated Chassis for Forestry

Structural design and test of arch waist dynamic chassis for hilly and mountainous areas

Optimum Design and Trafficability Analysis for an Articulated Wheel-Legged Forestry Chassis

Design and Performance Analysis of the Hydropneumatic Suspension System for a Novel Road-Rail Vehicle

A Straddle Monorail Running Gear with Single-Axle and Rotating Arm Axle Box Suspension

Vehicle Structural Design and Analysis in Maglev Experimental Line

Load Modeling of CRH3 Electric Multiple Unit Traction Drive System

Design and research of meshing mechanism of orchard monorail transporter

Conceptual design of high-speed semi-low-floor bogie for train-tram

Research on dynamic behavior of train dynamic model of straddle-type monorail

Dynamic parameters optimization of straddle-type monorail vehicles based multiobjective collaborative optimization algorithm

A novel 3D train–bridge interaction model for monorail system considering nonlinear wheel-track slipping behavior

Dynamics of three-axle-one-unit vehicles with self-steering single axle

Active Control of Shimmy in Articulated Single-Axle Straddle-Type Monorail Train

S-shaped Multipurpose Monorail for Hillside Orchards

A Novel Full-Scale Test Facility for Ballastless High-Speed Railroad with Simulated Train Moving Loads

Design of a Six-Swing-Arm Wheel-Legged Chassis for Forestry and Simulation Analysis of its Obstacle-Crossing Performance