A 24-to-240W 95.6%-Efficiency <300-μs-Settling-Time Hybrid MCR/PT Wireless Power Transfer System

Junwen Li,Xun Liu,Ka Nang Leung

DOI: https://doi.org/10.1109/tpel.2024.3382123

IF: 5.967

2024-01-01

IEEE Transactions on Power Electronics

Abstract:This paper proposes a hybrid wireless power transfer (WPT) system working in both magnetically coupled resonance (MCR) and parity-time symmetry (PT) modes to provide a wide dynamic output power range. Theoretically, it can operate with arbitrary coupling coefficients of the coupling coils and loads. More optimization freedoms can be released when comparing with the existing single-mode (i.e., either MCR or PT) WPT systems, such that a wider dynamic output power range and higher system efficiency are achieved simultaneously. Analytical models are developed. The analytical control-to-output transfer function in the PT mode reveals the fact that a complex-pole pair and a right-half-plane zero, which limit the loop-bandwidth of the PT-WPT system, exist in the control loop. Thus, a current-mode modulation scheme for the proposed WPT system in the PT mode is proposed to extend the loop-bandwidth. Driven by a 48-V DC source, the efficiency of the proposed hybrid WPT prototype is 86.5–95.6% when the coupling coefficient varies 0.1–0.3 and output power ranges 24–240 W. The settling time of the proposed hybrid WPT system ranges 100–300 μs in the whole output power range due to the use of the developed analytical models to the system design.

engineering, electrical & electronic