Abstract:Ranging accuracy is an important index to evaluate the performance of a LiDAR, which determines the LiDAR's resolving ability. In order to cover a wider detection range, there are directional differences between the channels of a vehicle-borne LiDAR usually, which will cause the lasers in different channels to act on the target at different incident angles, which will have impact on the ranging accuracy in each channel. Based on the working principle of a LiDAR, we establish the echo signal model of each channel, and deduce the detection Probability Density Function (PDF) of each channel. After that, we use Monte Carlo method to simulate and analyze the influence of the channel difference on the Systematic Error (SE) and Root Mean Square Error (RMSE) of ranging results, and correct the data by analyzing the characteristics of the statistical distribution in each channel. Then we design a corresponding experiment to verify the simulation results. The experimental results show that when the channel's pitch angle increases, the statistical distribution of ranging results deviates from the normal distribution gradually. The range of statistical distribution becomes wider, and presents an asymmetric distribution trend, and the lower the Signal-to-Noise Ratio (SNR), the more obvious this trend is. We find that the distributions of the ranging results' SE and RMSE both fit the exponential function well. Based on this, we propose a data correction method to correct the variation of ranging accuracy caused by channel differences. The LiDAR is placed at a height of 2 m and the vertical field of view (FOV) is −25°∼ +15°, and we set up three obstacles (0.5 × 0.5 × 1.8 m 3 ; 1 × 1 × 1 m 3 ; 1.6 × 3 × 1.6 m 3 ) to simulate pedestrians, vehicles, and other obstacles on the road. During the driving process of the vehicle (1 m–50 m), the average SE of ranging results in the channels is 0.72 m and the average RMSE is 0.77 m. After data correction, the average SE is reduced to −0.06 m, and the average RMSE is reduced to 0.11 m. The extreme difference of SE is reduced from 0.279 m to 0.025 m, and the decrease rate is 90.9 %. The extreme difference of RMSE is reduced from 0.166 m to 0.015 m, and the decrease rate is 91 %. In addition, we verified the applicability of the algorithm in four environments consisting of sunny day, sunny night, rainy day and rainy night. In these environments, this method still reduced the differences between channels and improved the ranging accuracy.

LiDAR Saturated Waveform Compensation-Based Real-Time Ranging Method for Traffic Sign Detection

Optimization of System Design and Calibration Algorithm for SPAD-Based LiDAR Imager

A Depth-Adaptive Waveform Decomposition Method For Airborne Lidar Bathymetry

A Method with Improved Accuracy and Robustness for Object Detection in Wharf Scenarios

A Novel Range Detection Method for 60ghz LFMCW Radar

Real-time high-precision FMCW laser range extraction method based on a hardware multiplier array

High-resolution LiDAR Using Random Modulated Continuous Wave with a Low Code Rate

LIDAR and vision-based real-time traffic sign detection and recognition algorithm for intelligent vehicle

High Resolution with Low Code Rate Random Modulation Cw Lidar for Range Imaging

High and Low Resolution Tradeoffs in Roadside Multimodal Sensing

Range Resolution Enhanced Method With Spectral Properties for Hyperspectral LiDAR

A range ambiguity classification algorithm for automotive LiDAR based on FPGA platform acceleration

Nonlinear Phase Estimation and Compensation for FMCW Ladar Based on Synchrosqueezing Wavelet Transform

High SNR signal processing system for coherent solid-state LIDAR with silicon photonic balanced photodetector array

Detection of moving objects using single-photon counting LIDAR

Ranging accuracy difference correction among channels of a vehicle-borne road detection LiDAR

Area-Based CFAR Target Detection for Automotive Millimeter-Wave Radar

Road target recognition based on radar range-Doppler spectrum with GS – ResNet

Cation-dependent nonlinear optical behavior in an octupolar 3D anionic metal-organic open framework.

A High-Resolution and Efficient Waveform Decomposition Method for Small-Footprint LiDAR

Dtof LIDAR System Using Addressable Multi-Channel VCSEL Transmitter, 128x80 SPAD Sensor, and ML-Based Object Detection for Adaptive Beam-Steering