Abstract:The current study investigated the geometry optimization of a hybrid-driven (based on the combination of air pressure and tendon tension) soft robot for use in robot-assisted intra-bronchial intervention. Soft robots, made from compliant materials, have gained popularity for use in surgical interventions due to their dexterity and safety. The current study aimed to design a catheter-like soft robot with an improved performance by minimizing radial expansion during inflation and increasing the force exerted on targeted tissues through geometry optimization. To do so, a finite element analysis (FEA) was employed to optimize the soft robot’s geometry, considering a multi-objective goal function that incorporated factors such as chamber pressures, tendon tensions, and the cross-sectional area. To accomplish this, a cylindrical soft robot with three air chambers, three tendons, and a central working channel was considered. Then, the dimensions of the soft robot, including the length of the air chambers, the diameter of the air chambers, and the offsets of the air chambers and tendon routes, were optimized to minimize the goal function in an in-plane bending scenario. To accurately simulate the behavior of the soft robot, Ecoflex 00-50 samples were tested based on ISO 7743, and a hyperplastic model was fitted on the compression test data. The FEA simulations were performed using the response surface optimization (RSO) module in ANSYS software, which iteratively explored the design space based on defined objectives and constraints. Using RSO, 45 points of experiments were generated based on the geometrical and loading constraints. During the simulations, tendon force was applied to the tip of the soft robot, while simultaneously, air pressure was applied inside the chamber. Following the optimization of the geometry, a prototype of the soft robot with the optimized values was fabricated and tested in a phantom model, mimicking simulated surgical conditions. The decreased actuation effort and radial expansion of the soft robot resulting from the optimization process have the potential to increase the performance of the manipulator. This advancement led to improved control over the soft robot while additionally minimizing unnecessary cross-sectional expansion. The study demonstrates the effectiveness of the optimization methodology for refining the soft robot’s design and highlights its potential for enhancing surgical interventions.

A Millimeter‐Scale Soft Robot for Tissue Biopsy Procedures

Flexible Biopsy Robot with Force Sensing for Deep Lung Examination

Soft Hybrid Actuated Hierarchical Bronchoscope Robot for Deep Lung Examination

Design and Stiffness Control of a Variable-Length Continuum Robot for Endoscopic Surgery

Image-Guided Teleoperation for Soft Bronchoscopy Robot

Design of a flexible robot toward transbronchial lung biopsy

Millimeter-Scale Soft Continuum Robots for Large-Angle and High-Precision Manipulation by Hybrid Actuation

Design of a Teleoperated Robotic Bronchoscopy System for Peripheral Pulmonary Lesion Biopsy

A Novel Robotic Bronchoscope System for Navigation and Biopsy of Pulmonary Lesions

Design and Nonlinear Error Compensation of a Multi-Segment Soft Continuum Robot for Pulmonary Intervention

Design Optimization of a Hybrid-Driven Soft Surgical Robot with Biomimetic Constraints

Transbronchial biopsy catheter enhanced by a multisection continuum robot with follow-the-leader motion

[A Novel Robotic Bronchoscopic Surgical System]

A Soft Pneumatic Two-Degree-of-Freedom Actuator for Endoscopy

A Cable-Driven Soft Robot Surgical System for Cardiothoracic Endoscopic Surgery: Preclinical Tests in Animals.

A Minimally Invasive Robotic Tissue Palpation Device

A Multi-Module Soft Robotic Arm with Soft End Effector for Minimally Invasive Surgery

A Novel Cable-Driven Soft Robot for Surgery

Chip-on-tip endoscope incorporating a soft robotic pneumatic bending microactuator

A Novel Robotic Bronchoscope with a Spring-Based Extensible Segment for Improving Steering Ability

Development of a Compact Continuum Tubular Robotic System for Nasopharyngeal Biopsy