Abstract:Three-dimensional (3D) printed, hierarchically porous nickel molybdenum (NiMo) electrocatalysts were synthesized and evaluated in a flow-through configuration for the hydrogen evolution reaction (HER) in 1.0 M KOH(aq) in a simple electrochemical H-cell. 3D NiMo electrodes possess hierarchically porous structures because of the resol-based aerogel precursor, which generates superporous carbon aerogel as a catalyst support. Relative to a traditional planar electrode configuration, the flow-through configuration allowed efficient removal of the hydrogen bubbles from the catalyst surface, especially at high operating current densities, and significantly decreased the overpotentials required for HER. An analytical model that accounted for the electrokinetics of HER as well as the mass transport with or without the flow-through configuration was developed to quantitatively evaluate voltage losses associated with kinetic overpotentials and ohmic resistance due to bubble formation in the porous electrodes. The chemical composition, electrochemical surface area (ECSA), and roughness factor (RF) were also systematically studied to assess the electrocatalytic performance of the 3D printed, hierarchically porous NiMo electrodes. An ECSA of 25163 cm<sup>2</sup> was obtained with the highly porous structures, and an average overpotential of 45 mV at 10 mA cm<sup>–2</sup> was achieved over 24 h by using the flow-through configuration. The flow-through configuration evaluated in the simple H-cell achieved high electrochemical accessible surface areas for electrochemical reactions and provided useful information for adaption of the porous electrodes in flow cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05648?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05648</a>.Experimental methods for resin synthesis, electrode fabrication, materials characterization, electrochemical measurements, electrochemical oxidations, ECSA measurements, SEM images, EDX, XRD, and gas chromatography (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05648/suppl_file/am1c05648_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

3D Printing of Graphene Aerogel Microspheres to Architect High‐Performance Electrodes for Hydrogen Evolution Reaction

In Situ Construction of Ni Enriched Porous NiAl As Long-Lived Electrode for Hydrogen Evolution at High Current Densities

Direct 3 D Printing of Ultralight Graphene Oxide Aerogel

Hydrogen Evolution Reaction Performance of Ni-Co-Coated Graphene-Based 3D Printed Electrodes

Bi-metallic electrochemical deposition on 3D pyrolytic carbon architectures for potential application in hydrogen evolution reaction

Fabrication of Laser-Induced Graphene on Carbon Electrodes for Efficient Hydrogen Evolution Reaction

Hybrid Transition Metal Dichalcogenide/Graphene Microspheres for Hydrogen Evolution Reaction

Self‐Assembled Three‐Dimensional Graphene Aerogel with an Interconnected Porous Structure for Lithium‐Ion Batteries

Ink‐printed metal/graphene aerogel for glucose electro‐oxidation

Ni nanoparticles supported on graphene layers: An excellent 3D electrode for hydrogen evolution reaction in alkaline solution

Direct photo-curing 3D printing of nickel-based electrocatalysts for highly-efficient hydrogen evolution

3D Printed Nickel–Molybdenum-Based Electrocatalysts for Hydrogen Evolution at Low Overpotentials in a Flow-Through Configuration

Pristine Graphene Electrode in Hydrogen Evolution Reaction.

3D MoS2-graphene Hybrid Aerogels As Catalyst for Enhanced Efficient Hydrogen Evolution

3D interweaving MXene–graphene network–confined Ni–Fe layered double hydroxide nanosheets for enhanced hydrogen evolution

Three-Dimensional Mos2/Rgo Hydrogel with Extremely High Double-Layer Capacitance As Active Catalyst for Hydrogen Evolution Reaction

3D‐Printed Monolith Metallic Ni–Mo Electrodes for Ultrahigh Current Hydrogen Evolution

Developments in Nanostructured MoS2-Decorated Reduced Graphene Oxide Composite Aerogel as an Electrocatalyst for the Hydrogen Evolution Reaction

Ni-Ni3P nanoparticles embedded into N, P-doped carbon on 3D graphene frameworks via in situ phosphatization of saccharomycetes with multifunctional electrodes for electrocatalytic hydrogen production and anodic degradation

Self-assembled Ultrathin NiCo2S4 Nanoflakes Grown on Ni Foam As High-Performance Flexible Electrodes for Hydrogen Evolution Reaction in Alkaline Solution

Three-dimensional Nitrogen-Doped Graphene Supported Molybdenum Disulfide Nanoparticles as an Advanced Catalyst for Hydrogen Evolution Reaction