Biomass derived activated carbon-based high-performance electrodes for supercapacitor applications

T. Manimekala,R. Sivasubramanian,S. Karthikeyan,Gnanaprakash Dharmalingam
DOI: https://doi.org/10.1007/s10934-022-01338-7
2023-01-26
Journal of Porous Materials
Abstract:Biomass-derived activated carbon has been prepared from a bio-source (peanut shells) and investigated as an electrode material for supercapacitors. The biomass-derived carbon was prepared by the hydrothermal method and activated using KOH. The material was characterized using a transmission electron microscope, scanning electron microscope, X-ray diffraction and Fourier transform infrared spectroscopy respectively. The surface area of the prepared material was analysed using Brunauer–Emmett–Teller technique. Electrochemical studies were carried out in both three and two-electrode configurations. From cyclic voltammetric studies, the electrical double layer capacitance behavior of the electrode was analysed. The specific capacitance estimated from galvanostatic charge–discharge (GCD) studies was 247 F/g at a current density of 0.25 A/g. Kinetic studies revealed more of a capacitive contribution to the diffusion component. A symmetric supercapacitor was fabricated in a Swagelok cell and the device characteristics were analysed. The cell voltage was found to be 0–1 V and the specific capacitance estimated from GCD was found to be 98 F/g at a current density of 0.25 A/g. Finally, cyclic stability studies were carried out for 5000 and 20,000 cycles and remarkable capacitance retention of 90% and 97%was obtained in the three and two-electrode configurations respectively. In addition voltage holding test was performed in the voltage range of 0.8 to 1.2 V to ascertain the stability of the supercapacitor. The changes at the electrode–electrolyte interface were analysed by electrochemical impedance spectroscopy.
materials science, multidisciplinary,chemistry, physical, applied
What problem does this paper attempt to address?