Abstract:Objective: This research focused on FMVSS301, which is required for higher energy absorption as a regulation for rear-end collisions. Since they are offset collisions, the deformation of the non-collision side frame, which does not directly contact the barrier, is less than on the collision side. The reason is that the rear bumper beam with curvature is deformed into a straight shape by the load from the barrier, resulting in an asymmetrical load distribution from the barrier that is biased toward the collision side. Therefore, the objective of this research was to construct a new bumper beam structure that reduces the difference in the load input to both frames and increases the energy absorption of the non-collision side frame. Method: The basic principle is to generate a counterforce against the lateral loads during transmitting the load from barrier to the frames. To achieve this, a bow-shaped rear bumper beam structure was devised. The rear bumper beam corresponds to the bow and the newly added connection plate to the string. The lateral load increase is suppressed and load distribution to the rear frame is maintained. Results: The designed rear bumper beam and rear components equipped with the rear bumper beam were both prepared and evaluated by drop test. With testing of the rear bumper beam, it was demonstrated that the load in the lateral direction, which conventionally generates over 80 kN, could be canceled. Tests of the rear component demonstrated that load distribution to the rear frame could be maintained, and the energy absorption of the non-collision side frame could be enhanced by 35 times. The total energy absorption of the barrier and the two frames was demonstrated to increase 2.9 times. Conclusion: The bow-shaped rear bumper beam was designed to distribute the load evenly to the collision and non-collision side frames, and to deform both frames, thereby achieving a higher energy absorption of the entire vehicle body. This is expected to be applicable to electric vehicles and FCVs, which require more energy absorption with increased vehicle weight.

Application of Lightweight Structure in Automobile Bumper Beam: A Review

Lightweight Glass Fiber-Reinforced Polymer Composite for Automotive Bumper Applications: A Review

Design and optimisation of vehicle frontal bumper beam with alternative carbon fibre-reinforced plastics in corrugated sandwich structure

Application of Carbon fiber-reinforced plastic composite material in automotive bumper

Data-driven lightweight design of bumper based on multi-methods

Composite Plastic Hybrid for Automotive Front Bumper Beam

The Design of a Piecewise-Integrated Composite Bumper Beam with Machine-Learning Algorithms

Application of lightweight materials in automobiles: A review

Multi-Scale Design and Optimization of Composite Material Structure for Heavy-Duty Truck Protection Device

Design of Straight-Retractable Energy-Absorbing Beam for Electric Cars and Its Crashworthiness Analysis

Fabrication of a prototype of bumper beam by single point incremental forming of laser welded tailored blank and characterization of its quasi-static crushing performance

Advanced lightweight materials for Automobiles: A review

Review of Crashworthiness Studies on Cellular Structures

Lightweight hybrid materials and structures for energy absorption: A state-of-the-art review and outlook

Optimization Design of Longitudinal Beam Structure in Car Frontal Crash

Crashworthiness design of vehicle structure with tailor rolled blank

A review of some new materials for lightweight and better performance purposes in vehicle components

Simulation Analysis of Inner Force Characteristics of Car Body Thin-walled Beam Structures Subject to Lateral Impact

Load distribution structure of rear bumper beam to enhance vehicle body energy absorption in rear-end collisions

Axial Crushing and Energy Absorption Integrated Design of Modular Filled Double-Hat Beam Composite Structures

Bionic Design of the Bumper Beam Inspired by the Bending and Energy Absorption Characteristics of Bamboo