Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. Focusing on the energy absorption characteristics of ultra-high molecular weight polyethylene (UHMWPE) fiber laminated panels, this study conducts ballistic tests and numerical simulations using 6 mm spherical projectiles to impact the UHMWPE laminated panels. The residual velocity characteristics, energy absorption patterns, and failure modes of the UHMWPE laminated panels under steel ball impacts were analyzed. The results show that the residual velocity of the steel ball increases with the increase of the incident velocity. In the velocity range near the ballistic limit velocity, the residual velocity of the steel ball increases sharply. When the incident velocity exceeds 340 m/s, the increase in residual velocity gradually slows down, tending towards a straight line. When the steel ball velocity is less than 330 m/s, the energy absorption of the UHMWPE laminated panels exhibits linear growth with increasing velocity, with a maximum energy absorption of 47.3 J. In the 327–340 m/s velocity range, the energy absorption of the laminated panels drops sharply from 47 J to around 30 J. In the 340 m/s–600 m/s velocity range, the decline in energy absorption gradually becomes more moderate, decreasing to around 20 J. Beyond 500 m/s, the energy absorbed by the UHMWPE laminated panels stabilizes with increasing velocity, and the fiber tensile failure is the main form of energy absorption of UHMWPE composite laminates under ballistic impact. The failure process of UHMWPE laminated panels presents a multi-stage failure mode, including fiber shear failure, tensile failure, and delamination. As the projectile's incident velocity increases, the damage mechanism of the UHMWPE laminated panels transitions from tensile-dominated to shear plugging-dominated. Through similarity theory analysis, under certain conditions, the ballistic limit velocity and the dimensionless parameter of unit energy absorption for the UHMWPE laminated panels satisfy geometric similarity.

Low‐Density Multilayer Graphdiyne Film with Excellent Energy Dissipation Capability under Micro‐Ballistic Impact

Graphdiyne Family-Tunable Solution to Shock Resistance

Graphynes: an Alternative Lightweight Solution for Shock Protection

Investigation of Projectile Impact Behaviors of Graphene Aerogel Using Molecular Dynamics Simulations

Dynamic Response Mechanisms of Thin UHMWPE under High-Speed Impact

Recoverable Slippage Mechanism in Multilayer Graphene Leads to Repeatable Energy Dissipation.

Enhanced Energy Dissipation of Graphene/cu Nanolaminates under Extreme Strain Rate Ballistic Perforation

Interfacial Failure Boosts Mechanical Energy Dissipation in Carbon Nanotube Films under Ballistic Impact

Damage Resistance of Kevlar® Fabric, UHMWPE, PVB Multilayers Subjected to Concentrated Drop-Weight Impact

Fabrication of Graphdiyne/Graphene Composite Microsphere with Wrinkled Surface via Ultrasonic Spray Compounding and its Microwave Absorption Properties

Ballistic experiments on the mechanism of protective layer against domino effect caused by projectiles

Investigation of the Ballistic Performance of GFRP Laminate under 150 m/s High-Velocity Impact: Simulation and Experiment

Enhanced ballistic resistance of multilayered cross-ply UHMWPE laminated plates

The penetration resistance behavior and corresponding size effects of ultra-high molecular weight polyethylene composite laminates

Graphene nanoribbon woven fabric against the impact of a cylindrical projectile

Combined effect of montmorillonite Cloisite 30B and graphene nanoplatelets on high‐density polyethylene matrix under high strain rate dynamic compression

Engineer Energy Dissipation in 3D Graphene Nanolattice Via Reversible Snap-Through Instability

Excellent impact resistance of multilayer metallic glass films subjected to micro-ballistic impact by overcoming dynamic size effects

Bouligand-like Structured CNT Film with Tunable Impact Performance Through Pitch Angle and Intertube Interaction

A new-structured nanocarbon cushion with highly impact-resistant properties

Mechanism-Driven Analytical Modelling Of Uhmwpe Laminates Under Ballistic Impact