Corrosion behavior of Ti-Nb-Ni foil as bipolar plates substrate in simulated PEMFC solution: Effects of fluoride concentration and temperature

Haifeng Zhu,Xiaopeng Wang,Wei Meng,Pingwen Ming,Fantao Kong
DOI: https://doi.org/10.1016/j.fuel.2023.130823
IF: 7.4
2024-01-11
Fuel
Abstract:In this work, corrosion behavior of Ti-Nb-Ni foil in 0.5 M H 2 SO 4 solution containing different fluoride concentrations at various temperatures was investigated by electrochemical measurements, X-ray photoelectron spectroscopy and scanning electron microscopy. Corrosion resistance of specimens degraded with temperature and fluoride concentration increasing judged by more negative open circuit potential, larger corrosion current density as well as reducing polarization resistance. The critical fluoride concentrations were in the range of 100 ∼ 200 ppm for 20°C and 50 ∼ 100 ppm for 40°C to 80°C, above which passive film was destroyed causing contact between substrate and solution. While in the cases of fluoride concentrations lower than critical value, passivation of foil was retained. Furthermore, a nickel-rich layer was found via X-ray photoelectron spectroscopy analyses and thickness of the layer descended with fluoride concentration and temperature increasing. Interfacial contact resistance of the foils after being potentiostatically polarized at 0.6 V for 6 h at 80°C were lower than 10 mΩ·cm −2 , meeting the requirement of Department of Energy (DOE) and interfacial contact resistance increased by different degrees with fluoride concentrations.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?