Abstract:Heavy Vehicles speeds and dynamic loads are critical factors to bridge’s structure fatigue and rapid deterioration. The proposed paper addresses the modeling and simulation of dynamic loads of heavy vehicles, such as trucks and buses, on bridges and the effects of their speed on frequency response. In light of the above analysis, this paper proposes a method on how to minimize the structural vibrational of the combined vehicle and bridge system using semi-active suspension control. The vehicle dynamic load is minimized through an optimization scheme to yield an impact force with negligible bridge lateral deflection. The dynamic coupling between the vehicle and bridge are studied by examining the modes that are most likely to be excited by the vehicle speed and the roughness of the bridge surface. The models consist of a bridge and a heavy vehicle. The bridge is modeled as continuos, lightly damped beam with different supports defined by the boundary conditions. The vehicle is a multi-degree of freedom (MDOF) system undergoing motion in one plane. The methods of solution consist of a simple supported beam that closely simulates the first three beam modes of the Kishwaukee Bridge in Rockford, Illinois. The surface of the bridge generates some random excitation that serves as input to the vehicle, this is commonly known as the roughness of the bridge surface. The heavy vehicle is moving from left to right of the simply supported beam. The system is analyzed and optimized by semi-active control algorithms. Close form numerical solution is obtained by a set of second order differential equations for the bridge-vehicle system. Experimental data obtained from the vibration testing of Kishwaukee Bridge (Illinois) were collected and validated with a FEM model. Only the first three beam modes were used due to the experimental limitations and the actual structural condition of the bridge. Using MATLAB a simulation is obtained by inputting the linear time-variant equations and optimizing the system. Simulations of bridge vertical motion under different dynamic load conditions were examined and the results of bridge structure response were analyzed by comparing the effects of passive versus semi-active suspension controls. The method shows effectively how we can reduce the dynamic load force magnitude and its frequency of impact. The latter is usually associated with structural damage caused to the bridge.

Machine learning driven damper for response control in vehicle-bridge interaction systems

FE-based Bridge Weigh-in-motion Based on an Adaptive Augmented Kalman Filter

Comparative Study on Vibration Control of A Scaled Bridge Using Fail-Safe Magneto-Rheological Fluid Dampers

Human-Simulated Intelligent Control of Train Braking Response of Bridge with Mrb

Numerical Study of Active Mass Damper Application on Cable-Stayed Bridge Structure Using Artificial Neural Network Algorithm

Use of semi-active tuned mass dampers to control footbridges subjected to synchronous lateral excitation

Random crowd-induced vibration in footbridge and adaptive control using semi-active TMD including crowd-structure interaction

Study on optimization algorithm of tuned mass damper parameters to reduce vehicle-bridge coupled vibration

Semi-Active Control of A Two-Span Bridge Using Field-Controllable Magneto-Rheological Dampers

Theoretical and Experimental Studies on Semi-Active Feedback Control of Cable Vibration Using MR Dampers

Real-time hybrid simulation of a complex bridge model with MR dampers using the convolution integral method

Passive and Adaptive Damping Systems for Vibration Mitigation and Increased Fatigue Service Life of a Tied Arch Railway Bridge

Energy-based additional damping on bridges to account for vehicle-bridge interaction

&Lt;title>variable-Structure-system-based Logic Fuzzy Control of Bridge Vibration Using Fail-Safe Magnetorheological Fluid Dampers</title>

State-Derivative Feedback Control Of Cable Vibration Using Semiactive Magnetorheological Dampers

Effects of Heavy Vehicle Speeds on the Structure and Vibration of Bridges

Lateral Vibration Mitigation for Coupled High-Speed Rail Vehicle and Cable-Stayed Bridge System Subjected to Ground Motions

Semi-active Control to Reduce Lateral Vibration of Passenger Rail Vehicle Using Disturbance Rejection and Continuous State Damper Controllers

Dynamic Analysis and Optimization of Vehicle-Bridge Interaction System under Road Roughness and Time Variability of Element Interpolation Function

SEMI-ACTIVE CONTROL FOR STRUCTURAL VIBRATION BASED ON PREDICTIVE ALGORITHM

Machine Learning Prediction and Evaluation for Structural Damage Comfort of Suspension Footbridge