Abstract:Objective: Electrochemical microsensors based on noble metals can give essential information on their microenvironment with high spatio-temporal resolution. However, most advanced chemo- and biosensors lack the long-term stability for physiological monitoring of brain tissue beyond an acute application. Noble metal electrodes are widely used as neural interfaces, particularly for stimulating in the central nervous system. Our goal was to recruit already deployed, unmodified noble metal electrodes (Pt, Pt/Ir) as in situ chemical sensors. Approach: With advanced electrochemical sensor methods, we investigated electrode surface processes, oxidizable species and oxygen as an indicator for tissue mass transport. We developed a unique, multi-step, amperometric/potentiometric sensing procedure derived from the investigation of Pt surface processes by chronocoulometry providing fundamental characterization of the electrode itself. Main results: The resulting electrochemical protocol preconditions the electrode, measures oxidizable and reducible species, and the open circuit potential (OCP). A linear, stable sensor performance was demonstrated, also in the presence of proteins, validating signal stability of our cyclic protocol in complex environments. We investigated our sensor protocol with microelectrodes on custom Pt/Ir-wire tetrodes by in vivo measurements in the rat brain for up to four weeks. Results showed that catalytic activity of the electrode is lost over time, but our protocol is repeatedly able to both quantify and restore electrode sensitivity in vivo. Significance: Our approach is highly relevant because it can be applied to any existing Pt electrode. Current methods to assess the brain/electrode microenvironment mainly rely on imaging techniques, histology and analysis of explanted devices, which are often end-point methods. Our procedure delivers online and time-transient information on the chemical microenvironment directly at the electrode/tissue interface of neural implants, gives new insight into the charge transfer processes, and delivers information on the state of the electrode itself addressing long-term electrode degradation.

Regenerative Strategy of Gold Electrodes for Long-Term Reuse of Electrochemical Biosensors

Cleaning of LTCC, PEN, and PCB Au electrodes towards reliable electrochemical measurements

Fabrication of gold microelectrodes on polystyrene sheets by UV-directed electroless plating and its application in electrochemical detection

Assembly of Self-Cleaning Electrode Surface for the Development of Refreshable Biosensors

Improvement of Low-Cost Commercial Carbon Screen-Printed Electrodes Conductivities with Controlled Gold Reduction Towards Thiol Modification

Thermally annealed large-scale gold nanostructure platform for long-term and label-free electrochemical monitoring of cellular metabolism

A customized 3D bio-macroporous cryogels for efficient and selective gold extraction

Graphene/chitosan nanoreactors for ultrafast and precise recovery and catalytic conversion of gold from electronic waste

2D Electrodes From Functionalized Graphene for Rapid Electrochemical Gold Extraction and Reduction From Electronic Waste

Self-assembled monolayers of thiols on gold electrodes for bioelectrochemistry and biosensors

Edible gold leaf as a viable modification method for screen-printed sensors

Electrode Surface Rebuilding for Electrochemical Assembling of Conductive PEDOT:PSS Hydrogel Towards Biosensing

Prototypical Nonelectrochemical Method for Surface Regeneration of an Integrated Electrode in a PDMS Microfluidic Chip

New life for old wires: electrochemical sensor method for neural implants

Facile strategy for uniform gold coating on silver nanowires embedded PDMS for soft electronics

Robust Gold Electrode Fabrication in a Microfluidic System

Characterization of Nanoporous Gold Electrodes for Bioelectrochemical Applications.

Direct Application of Gold Nanoparticles to One-Pot Electrochemical Biosensors.

Recent Developments in the Design and Fabrication of Electrochemical Biosensors Using Functional Materials and Molecules

Recent Progresses in Biosensor Regeneration Techniques

Sustainable electrochemical gold dissolution process based on triboelectric nanogenerator