Abstract:Hybrid approach by integrating remote sensing datasets along with field measured river bathymetry data to estimate the river discharge to calibrate the Soil and Water Assessment Tool (SWAT) model can be used for the streams with narrow width. Calibration based on (i) stage‐discharge curve using spatial proximity approach and (ii) water level and river bathymetry was found to be a better approach. Evapotranspiration simulated from SWAT has higher variability as compared to that of evapotranspiration derived from MODIS. Calibration of a hydrological model is a challenging task, especially in basins that are data scarce. With the incorporation of regional information and integration with satellite data, the parameters of hydrological models can be estimated for a basin with scant or no discharge records. The main objective of this study is to calibrate and validate a hydrological model based on a limited amount of in‐situ measured and remote sensing satellite datasets in a data‐sparse region. Multiple techniques were applied for the model calibration: (1) stage‐discharge curves using a spatial proximity approach, (2) Simplified Surface Energy Balance actual evapotranspiration, (3) river discharge using a physical similarity regionalization approach, and (4) a new hybrid approach by integrating remote sensing datasets along with field measured river bathymetry data to estimate the river discharge. To demonstrate the methodology, we employed the widely used Soil and Water Assessment Tool (SWAT) hydrological model in Manipur River Basin, India. The sensitivity, calibration, and validation of the SWAT model were carried out by using the Sequential Uncertainty Fitting Technique. During calibration, the coefficient of determination (R2) and the Kling Gupta Efficiency (KGE) were found to be in the range of 0.46–0.81 and 0.41–0.83, whereas during validation R2 and KGE were found to be in the range of 0.40–0.79 and 0.53–0.77 for the four different techniques. Among all the four techniques applied in this study, calibration based on (i) stage‐discharge curve using spatial proximity approach and (ii) new hybrid approach by integrating remote sensing datasets and river bathymetry were found as the better approaches as indicated by the statistical indices. The performance evaluation of the model through a new hybrid approach by integrating remote sensing and in‐situ measured datasets for rivers with narrow width represents a promising technique for use in a data sparse region.

Regional coupled surface–subsurface hydrological model fitting based on a spatially distributed minimalist reduction of frequency domain discharge data

Coupled Finite-Volume Model for 2D Surface and 3D Subsurface Flows

Simulation of Rainfall-Runoff in the Deep Hollow Lake Watershed Using an Integrated Surface-Subsurface Flow Model

On the development and analysis of coupled surface–subsurface models of catchments. Part 2. A three-dimensional benchmark model and its properties

On the development and analysis of coupled surface-subsurface models of catchments. Part 2. A three-dimensional benchmark model and its properties

Urban Pluvial Flood Modeling by Coupling Raster-Based Two-Dimensional Hydrodynamic Model and SWMM

Multi-dimensional hydrological–hydraulic model with variational data assimilation for river networks and floodplains

On the development and analysis of coupled surface–subsurface models of catchments. Part 3. Analytical solutions and scaling laws

Identification and Regionalization of Streamflow Routing Parameters Using Machine Learning for the HLM Hydrological Model in Iowa

On the development and analysis of coupled surface-subsurface models of catchments. Part 1. Analysis of dimensions and parameters for UK catchments

On the development and analysis of coupled surface-subsurface models of catchments. Part 3. Analytical solutions and scaling laws

On the development and analysis of coupled surface–subsurface models of catchments. Part 1. Analysis of dimensions and parameters for UK catchments

A review of integrated surface-subsurface numerical hydrological models

Flux tracking of groundwater via integrated modelling for abstraction management

Development and Evaluation of a Saturated Zone Module in an Integrated Urban Hydrological Model

Regional Low Flow Hydrology: Model Development and Evaluation

Toward Flash Flood Modeling Using Gradient Resolving Representative Hillslopes

Enhancing water management in Northern European lowland chalk streams: A parsimonious, high-resolution hydrological model using groundwater level as a proxy for baseflow

Hydrological modelling on atmospheric grids: using graphs of sub-grid elements to transport energy and water

Investigating hydrological model versatility to simulate extreme flood events

Enhancing hydrological model calibration through hybrid strategies in data‐scarce regions