Abstract:A series of accidents at the Fukushima Daiichi Nuclear Power Station (F1NPS), following the 11 March 2011 earthquake and tsunami, resulted in the release of radioactive substances into the ocean. In particular, the release of large amounts of radioactive caesium has damaged the fishing industry, leading to voluntary restrictions on fishing and shipping. Oceanic dispersion simulations based on estimates of the pathways and fluxes of radioactive materials provide useful information for assessing the environmental impacts and formulating measures to mitigate the effects of the accident. For the direct release rate from the F1NPS site, an estimation method was developed using the results from nearby monitoring, and the seawater exchange rate was estimated in target volume using a numerical simulation. However, the influence of volume on the seawater exchange rate was not considered. Appropriate volumes must be considered when estimating the effects of future accidents. In addition, the directional coastal transport was underestimated in the simulations of the F1NPS accident because of the low resolution. To estimate the pathways and fluxes of radioactive material to the ocean and understand the distribution of the concentration of radioactive material based on ocean dispersion simulations, a study was conducted using a higher-resolution model. The horizontal resolution of the conventional ocean dispersion model Regional Ocean Modelling System (ROMS), was increased from 1 km to 200 m. The optimal settings of the seawater exchange rate were investigated, and the radioactive caesium transport process in the coastal direction was more accurately reflected. We found that the conventional volume for determining the seawater exchange rate, including the locations of release sources and observation points, is optimal. The validity of this finding was confirmed using experimental equations from previous oceanic tracer release experiments. To estimate future release rates, it an appropriate volume must be defined, for example, depending on the distance between the locations of the release sources and the observation point. In addition, improvements in the accuracy of the simulation of the coastal transport process were observed owing to the higher resolution, which increased reproducibility. However, with a horizontal resolution of 200 m, problems with repeatability near the harbours arose. A higher resolution, achieved using nesting or other methods, would be desirable to deal with releases smaller than those in the F1NPS accident.

Dependency of the source term estimation method for radionuclides released into the atmosphere on the available environmental monitoring data and its applicability to real-time source term estimation

Inverse modeling of the 137Cs source term of the Fukushima Dai-ichi Nuclear Power Plant accident constrained by a deposition map monitored by aircraft

An inverse method to estimate emission rates based on nonlinear least-squares-based ensemble four-dimensional variational data assimilation with local air concentration measurements

Release Rate Estimation of Both Long- and Short-Lived Radionuclides for the Fukushima Daiichi Nuclear Accident Based on Local-Scale Observations

SENSITIVITY ANALYSIS OF THE RADIOACTIVE MONITORING DATA IN THE FUKUSHIMA DAIICHI NUCLEAR POWER PLANT

Source Term Estimation in Nuclear Accidents Using 4d Variational Data Assimilation for Heterologous Atmospheric Condition

Atmospheric-dispersion database system that can immediately provide calculation results for various source term and meteorological conditions

Inversion of 137cs Emissions Following the Fukushima Accident with Adaptive Release Recovery for Temporal Absences of Observations

Coupled Source Term Estimation Using Both Forward and Backward Method for Nuclear Power Plant Accident

Fast On-Line Source Term Estimation Of Non-Constant Releases In Nuclear Accident Scenario Using Extended Kalman Filter

Utilization of 134Cs/137Cs in the environment to identify the reactor units that caused atmospheric releases during the Fukushima Daiichi accident

Local Atmospheric Transport Behaviors of Representative Radionuclides During the Fukushima Accident: A 200-M-resolution Cross-Scale Study from Site to 20 Km

Estimation of 137Cs source term from Fukushima nuclear accident

Comparison Between Different Source Reconstruction Methods of Atmospheric Leakages

Objective Source Inversion of Continuous Atmospheric 37cs Releases Following the Fukushima Accident

Modified Ensemble Kalman Filter for Nuclear Accident Atmospheric Dispersion: Prediction Improved and Source Estimated

Source Localization of Accidental Radionuclide Release Using a Data Assimilation Method Based on Forward and Backward Dispersion Simulations

Improving the estimation of direct release rates and transport processes from the Fukushima Daiichi Nuclear Power Plant accident using higher-resolution oceanic dispersion model

Objective inversion of the continuous atmospheric 137Cs release following the Fukushima accident

EXPERIMENTAL STUDY ON ACCIDENT SOURCE TERMS TRANSPORT AND DEPOSITION BEHAVIOR IN NUCLEAR POWER PLANTS

Estimation of the Release Time of Radio-Tellurium During the Fukushima Daiichi Nuclear Power Plant Accident and Its Relationship to Individual Plant Events