Abstract:K-carrageenan and various concentrations of zinc nitrate hexahydrate have been combined to develop a zinc ion-conducting biopolymer electrolyte membrane using the solution casting method. To examine the amorphous nature of the samples, X-ray diffraction (XRD) study has been used. The maximum amorphous nature is observed for 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate biopolymer membrane. Fourier transform infrared spectroscopy (FTIR) investigations have shown that the complexation occurs between the K-carrageenan with zinc nitrate hexahydrate. Surface morphology of Pure K-carrageenan, 1 g K-carrageenan with 1.1 M.wt % of zinc nitrate hexahydrate and 1 g K-carrageenan with 1.2 M.wt % of zinc nitrate hexahydrate have been studied by SEM analysis. Pure K-carrageenan membrane (SEM) has uniform surface with uniform small pores. 1 g K-carrageenan with 1.1 M.wt % of zinc nitrate hexahydrate membrane (SEM) shows rectangular rod-shaped nature along with pores of moderate diameter. 1 g K-carrageenan with 1.2 M.wt % of zinc nitrate hexahydrate membrane SEM shows rectangular rod-shaped nature along with pores of moderate diameter and aggregates. For the zinc-doped biopolymer membrane samples, the differential scanning calorimetry (DSC) is used to determine the glass transition temperature. Pure K-carrageenan has got T g value at 37.04 °C. When the salt concentration is increased upto 0.9 M.wt % of the T g value increases. When the salt concentration is further increased upto 1.1 M.wt % of the T g value decreases. Highest zinc ion conducting membrane has got a T g value of 75.95 °C. According to electrochemical impedance spectroscopy (EIS), the 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate membrane has highest zinc ion conductivity of 2.9 × 10 −3 S cm −1 . According to the linear sweep voltammetry (LSV) investigation, the 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate membrane has shown a wide electrochemical stability window of 2.75 V. The Evans polarization method determined that Zn 2+ ion has a transference number of 0.42. The cyclic stability of highest conducting biopolymer membrane (Zn 2+ ion) is studied by Cyclic Voltammetry. The electrolyte used in the construction of the primary zinc battery is 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate having highest zinc ion conductivity. For this built-in battery, the OCV (Open Circuit Voltage) is found to be 1.43 V.

Preparation of primary magnesium battery based on kappa carrageenan with magnesium perchlorate and its application to electrochemical devices

Preparation and characterization of biopolymer electrolyte based on gellan gum with magnesium perchlorate for magnesium battery

Conducting biopolymer electrolyte based on pectin with magnesium chloride salt for magnesium battery application

Investigating the properties of hydroxy propyl methyl cellulose based magnesium ion-conducting solid polymer electrolytes for primary battery applications

Flexible magnesium-ion-conducting solid poly-blend electrolyte films for magnesium-ion batteries

Magnesium ion-conducting solid polymer electrolyte based on cellulose acetate with magnesium nitrate (Mg(NO3)2·6H2O) for electrochemical studies

Plasticized solid polymer electrolyte based on triblock copolymer poly(vinylidene chloride-co-acrylonitrile-co-methyl methacrylate) for magnesium ion batteries

An insight into the suitability of magnesium ion-conducting biodegradable methyl cellulose solid polymer electrolyte film in energy storage devices

A study on blend polymer electrolyte based on poly(vinyl alcohol)-poly (acrylonitrile) with magnesium nitrate for magnesium battery

Magnesium ion conducting PVB-based polymer electrolyte for solid-state magnesium batteries

Plastic crystal-incorporated magnesium ion conducting gel polymer electrolyte for battery application

Preparation of eco-friendly biopolymer electrolyte, K-carrageenan with zinc nitrate hexahydrate salt, for application in electrochemical devices

A Microporous Gel Polymer Electrolyte with High Mg2+ Ionic Conductivity at Room Temperature

An electroactive β-phase polyvinylidene fluoride as gel polymer electrolyte for magnesium–ion battery application

Investigations on magnesium ion conducting gellan gum-based biopolymer blend electrolytes for energy storage applications

Sodium alginate incorporated with magnesium nitrate as a novel solid biopolymer electrolyte for magnesium-ion batteries

Performance analysis of electrochemical cell using magnesium-doped tamarind gum polymer electrolyte

Improvement of the magnesium battery electrolyte properties through gamma irradiation of nano polymer electrolytes doped with magnesium oxide nanoparticles

Study of proton-conducting polymer electrolyte based on K-carrageenan and NH4SCN for electrochemical devices

Tamarind gum based magnesium ion conducting polymer membrane for energy storage applications

Designing Gel Polymer Electrolyte with Synergetic Properties for Rechargeable Magnesium Batteries