Abstract:This paper presents the stability analysis of three real large rock slopes prone to failure with different mechanisms to investigate the applicability of the response surface methodology (RSM) for reliability-based rock slope problems. Initially, a detailed review of studies was performed to identify the gaps and common types of reliability-based rock slope problems. The applicability of RSMs based reliability methods was then investigated for three types of identified rock slope reliability problems via three case studies–type (1) Chenab rock slope prone to stress-controlled failures neglecting spatial variability, type (2) Deccan gold mine slope prone to stress-controlled failures considering spatial variability, and type (3) Rishikesh-Badrinath Highway slope prone to structurally controlled failures neglecting spatial variability. Analysis was performed by coupling MATLAB coded RSMs with advanced numerical tools and results were compared with those of direct Monte-Carlo Simulations (MCSs) based reliability method. Further, a detailed comparative study was carried out to evaluate the effect of the use of different response surfaces, i.e., polynomial based, Radial Basis Functions (RBFs) based, Support Vector Machine (SVM) based, kriging, Moving Least Square (MLS) and Gaussian Process Regression (GPR) on the accuracy and efficiency of RSMs based reliability analysis. Accuracy was evaluated using the Nash–Sutcliffe Efficiency (NSE) and Relative Difference in Reliability Index (RDRI), while computational efficiency was evaluated via the computational time required to evaluate the reliability with acceptable accuracy. RSMs based methods are observed to be highly accurate and efficient for the reliability analysis of large rock slopes. Further, the accuracy and efficiency are observed to be dependent upon the employed response surfaces and type of the problem. Suggestive guidelines are provided for selecting most suitable response surfaces for different problem types– a) for type 1 problem, Kriging and Least Square (LS)-SVM, b) for type 2 problem, some RBFs based and LS-SVM, and c) for type 3 problem, some RBFs based and LS-SVM are the most suitable RSMs.

A Multimodel Bayesian Reliability Analysis for a Rock Slope to Counter Data Insufficiency

Efficient Reliability Analysis of Slopes Integrating the Random Field Method and a Gaussian Process Regression‐based Surrogate Model

Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

Reliability-based Assessment of Stability of Slopes

Incorporating stratigraphic boundary uncertainty into reliability analysis of slopes in spatially variable soils using one-dimensional conditional Markov chain model

Reliability Analysis of Three-Dimensional Rock Slope

Bayesian-based Probabilistic Kinematic Analysis of Discontinuity-Controlled Rock Slope Instabilities

Geotechnical reliability analysis with limited data: Consideration of model selection uncertainty

Probabilistic Stability Analysis of Rock Slopes with Cracks

Data-driven reliability assessment with scarce samples considering multidimensional dependence

A Methodology for Imprecise Moment-Independent Global Sensitivity Analysis with Limited Data of Copula-Dependent Inputs: Application for Slopes

Probabilistic analysis of width-limited 3D slope considering spatial variability of Hoek–Brown rock masses

Uncertainty and Reliability Analysis of Open Pit Rock Slopes: A Critical Review of Methods of Analysis

Reliability-based stability analysis of large rock slopes with different failure mechanisms using response surface methodology

Multi Stress-Strength Reliability Based on Progressive First Failure for Kumaraswamy Model: Bayesian and Non-Bayesian Estimation

Probabilistic back analysis for rainfall-induced slope failure using MLS-SVR and Bayesian analysis

Probabilistic Based Reliability Slope Stability Analysis Using FOSM, FORM, and MCS

Probabilistic back analysis of rock strength parameters in heavily jointed rock slopes based on Bayesian inference

Reliability Estimation in a Multicomponent Stress-Strength Model Based on Inverse Weibull Distribution

Characterizing Model Uncertainty of Upper-Bound Limit Analysis on Slopes Using 3D Rotational Failure Mechanism

Probabilistic Analysis of Rock Slope Stability with First-Order Approximation