Abstract:Abstract: Concrete is widely considered for its strength to withstand heavy loads and that‟s why this matrix is used for construction purposes. The growth in population has placed an enormous need for more and more infrastructure and it keeps growing. The outcome of this demand is the increase in production of cement. Massive amount of waste materials and byproducts are produced by manufacturing enterprises such as silica fumes, wood ash, and mineral slag and so on. As a result, waste management has become a huge problem for our environment. There are several minerals in wood ash, which can be extracted for further use. A big ingradient calcium carbonate, which is 25% or even 45% (depending on feedstock and burining condition). Less than 10 percent is potash and less than 1 percent is phosphate; there are some elements of iron, manganese, zinc, copper and some metal parts. These numbers however, vary as combustion temperature is an important element for the determination of wood ash. Many of these are in the form of oxides, mainly. If we mix the ashes to water the insoluble silica and calcium carbonate will settle to bottom and sodim salt and soluble potassium will dissolve. Sugarcane is commonly used to produce sugar and ethanol. After sugar juice is extracted from sugarcane, sugarcane bagasse is produced, which is about 50% of the sugarcane level. Bagasse is widely used as a fuel in combining steam production and power generation. In this process, sugarcane ash (SCBA) remains the last waste in the sugar production chain.. However, SCBA is generally disposed of in landfills in India The experimental investigations are carried out for compressive strength, split and flexural strength for curing period of 7, 14 and 28 days. The experimental results show that the for a combined replacement percentage of 8&8%, which includes 8% SCBA and 8% WOOD ASH with addition of aramid fiber 1.2% the values of compressive strength, flexural strength and split tensile strength were higher when compared to other replacement percentages The result shows that concrete workability is fine and within limits after replacing cement with SCBA, WOOD ASH with addition of aramid fiber. However, workability gets reduced at higher replacement of materials. The strength parameters such as compressive strength, flexural strength, and split tensile strength also increase and show an optimum value at 8&8% cement replacement and 1.2% Addition of aramid fibers respectively.

Effect of Coir Fibre Ash (CFA) on the strengths, modulus of elasticity and embodied carbon of concrete using response surface methodology (RSM) and optimization

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

Effect of silica fume and fly ash as cementitious material on hardened properties and embodied carbon of roller compacted concrete

Effect of wheat straw ash as cementitious material on the mechanical characteristics and embodied carbon of concrete reinforced with coir fiber

Utilization of Corn Cob Ash as Fine Aggregate and Ground Granulated Blast Furnace Slag as Cementitious Material in Concrete

Optimization of Fresh and Mechanical Characteristics of Carbon Fiber-Reinforced Concrete Composites Using Response Surface Technique

Investigating embodied carbon, mechanical properties, and durability of high-performance concrete using ternary and quaternary blends of metakaolin, nano-silica, and fly ash

Synergistic effect of recycling waste coconut shell ash, metakaolin, and calcined clay as supplementary cementitious material on hardened properties and embodied carbon of high strength concrete

Long-term strength and durability performance of eco-friendly concrete with supplementary cementitious materials

Experimental study on the mechanical behavior of concrete incorporating fly ash and marble powder waste

To Study the Partial Replacement of Cement with Sugarcane Bagasse and Wood Ash with Addition of Aramid Fiber

Mechanical performance and environmental impact of normal strength concrete incorporating various levels of coconut fiber and recycled aggregates

Enhancing Concrete Performance through Sustainable Utilization of Class-C and Class-F Fly Ash: A Comprehensive Review

Evaluating the influence of fly ash and waste glass on the characteristics of coconut fibers reinforced concrete

Short-term analysis on the combined use of sugarcane bagasse ash and rice husk ash as supplementary cementitious material in concrete production

Efficiency of Supplementary Cementitious Materials and Natural Fiber on Mechanical Performance of Concrete

Effect of volcanic pumice powder ash on the properties of cement concrete using response surface methodology

A study on the synthesis and performance evaluation of fly ash and alccofine as sustainable cementitious materials

Global warming potential-based life cycle assessment and optimization of the compressive strength of fly ash-silica fume concrete; environmental impact consideration

Workability and mechanical behavior of steel fiber reinforced self-compacting concrete with supplementary cementitious materials

Thermo-mechanical properties and sustainability analysis of newly developed eco-friendly structural foamed concrete by reusing palm oil fuel ash and eggshell powder as supplementary cementitious materials