Abstract:This work proposed a multiple mode Fano resonance-based refractive index sensor with high sensitivity that is a rarely investigated structure. The designed device consists of a metal-insulator-metal (MIM) waveguide with two rectangular stubs side-coupled with an elliptical resonator embedded with an air path in the resonator and several metal defects set in the bus waveguide. We systematically studied three types of sensor structures employing the finite element method. Results show that the surface plasmon mode's splitting is affected by the geometry of the sensor. We found that the transmittance dips and peaks can dramatically change by adding the dual air stubs, and the light-matter interaction can effectively enhance by embedding an air path in the resonator and the metal defects in the bus waveguide. The double air stubs and an air path contribute to the cavity plasmon resonance, and the metal defects facilitate the gap plasmon resonance in the proposed plasmonic sensor, resulting in remarkable characteristics compared with those of plasmonic sensors. The high sensitivity of 2600 nm/RIU and 1200 nm/RIU can simultaneously achieve in mode 1 and mode 2 of the proposed type 3 structure, which considerably raises the sensitivity by 216.67% for mode 1 and 133.33% for mode 2 compared to its regular counterpart, i.e., type 2 structure. The designed sensing structure can detect the material's refractive index in a wide range of gas, liquids, and biomaterials (e.g., hemoglobin concentration).

Highly Sensitive Multichannel Fano Resonance-Based Plasmonic Sensor for Refractive Index and Temperature Sensing Application

High Sensitivity Refractive Index and Temperature Sensors with Tunable Multiple Fano Resonances

Tunable Multiple Fano Resonance Plasmonic Nanosensor with an Oblique Path in a Pentagonal-Ring-Shaped Resonator

Multiple Fano resonance modes in an ultra-compact plasmonic waveguide-cavity system for temperature sensing

High Sensitivity Plasmonic Sensor Based on Fano Resonance with Inverted U-Shaped Resonator

A MIM Waveguide Structure of a High-Performance Refractive Index and Temperature Sensor Based on Fano Resonance

Improved Refractive Index-Sensing Performance of Multimode Fano-Resonance-Based Metal-Insulator-Metal Nanostructures

Flat Photonic Crystal Fiber Plasmonic Sensor for Simultaneous Measurement of Temperature and Refractive Index with High Sensitivity

Highly sensitive plasmonic sensor with a coupled split-square-ring resonator

Plasmonic Refractive Index Sensor with High Figure of Merit Based on Concentric-Rings Resonator

Plasmonic Multichannel Refractive Index Sensor Based on Subwavelength Tangent-Ring Metal–Insulator–Metal Waveguide

Plasmonic Refractive Index Sensor and Plasmonic Bandpass Filter Including Waveguide and Four Teeth Based On Fano Resonances

Fano Resonance Hybrid Waveguide-Coupled Plasmonic Sensor Using Transparent Conductive Oxide in the Near-Infrared Range

Plasmonic tapered-fiber interference sensor for simultaneously detecting refractive index and temperature

A Highly Sensitive D-Shaped PCF-SPR Sensor for Refractive Index and Temperature Detection

A Plasmonic Structure of Fano Resonance in the MIM Waveguide with r-Shaped Resonator for Refractive Index Sensor

A High-Sensitivity Refractive-Index Sensor Based on Plasmonic Waveguides Asymmetrically Coupled with A Nanodisk Resonator

Refractive Index Sensor Based on Fano Resonance in a Ring with a Stub Cavity Structure

High Performance Refractive Index Sensor Based On Multi-Fano Resonances In Waveguide Coupled Cross-Shaped Resonator

Tunable Nano Refractive-Index Sensor Structure Base on Fano Resonance

A Plasmonic Refractive Index Sensor Based on A Mim Waveguide with A Side-Coupled Nanodisk Resonator