Abstract:With the increasing demand for environmentally friendly and sustainable materials, research on cellulose/bio-based polyester composites has received increasing attention. However, the hydrophilicity of cellulose remains a major factor in its poor interaction with hydrophobic bio-based polyester. To prepare microcrystalline cellulose (MCC)/poly(butylene succinate) (PBS) composite monofilaments with high cellulose content to suppress the deformation of PBS, hexadecyltrimethoxysilane (KH1631) was selected for surface silylation of MCC at a mass ratio of 1:0.5 based on the principle of polarity similarity. The physical–chemical double crosslinking of KH1631 with MCC enhanced the interfacial bonding between MCC and PBS, so composite monofilaments with modified MCC (named mMCC) contents up to 35 wt% were prepared by melt spinning. After thermal stretching, mMCC/PBS composite monofilaments exhibited uniformly distributed microporous structure and double yield behaviors. Despite the continuous decrease in breaking strength (from 210 to 84 MPa) and elastic modulus (from 1380 to 590 MPa) due to the addition of mMCC, the yield strength (116 MPa) of the mMCC/PBS composite monofilaments was consistent with that of PBS when the mMCC addition reached 25 wt%, indicating no impact on usage intensity. Moreover, mMCC/PBS composite monofilaments showed excellent tensile elasticity (up to 95%), excellent fatigue resistance, and low residual strains under small deformation (15%). Notably, the addition of 15–35 wt% mMCC increased the degradability of composite monofilaments, the degradation rate following 100 days of treatment in an aqueous environment ranged from 3.8%(PBS) to 4.7% (P-mM25), and the degradation rate following 180 days of burial in soil ranged from 3.9%(PBS) to 12.3% (P-mM35). Overall, our work significantly enhanced the compatibility between MCC and PBS without the use of any high-cost modifiers or complex processing methods, and successfully developed mMCC/PBS composite monofilaments that exhibit excellent dimensional stability during use and quick degradation after disposal.

Simultaneously enhancing strength and toughness for green poly (butylene succinate) composites by regulating the dispersed rice husk with the silane coupling agent

Mechanical and thermal properties of poly(butylene succinate)/plant fiber biodegradable composite

Impacts of Baobab (adansonia Digitata) Powder on the Poly(Butylene Succinate) Polymer Degradability to Form an Eco-Friendly Filler-Based Composite

Polybutylene Succinate/Calcium Carbonate Based Biocomposite Film Reinforced with Silica Derived from Non-glutinous Rice Husk

Alkali-treated and silanated luffa fiber reinforced poly(butylene succinate) composites: A study of mechanical and water absorption characterization

Simultaneously enhancing microelastic response and degradability for poly(butylene succinate) composite monofilaments by silanized microcrystalline cellulose

Enhanced mechanical properties of poly(butylene succinate)/silk sericin composite monofilaments with silane coupling agent KH570

Crystallization, thermal, and compatibility performances of poly (butylene succinate) (PBS)/poly((R)‐3‐hydroxybutyrate‐co‐(R) 3‐hydroxyhexanoate) (PHBHHx) blends

Synergistic modification of polylactic acid by oxidized straw fibers and degradable elastomers: A green composite with good strength and toughness

Rheological, thermal, and mechanical properties of poly(butylene succinate) (PBS)/poly(L-lactide) (PLA) fiber biodegradable green composites

Highly Enhanced Mechanical, Thermal, and Crystallization Performance of PLA/PBS Composite by Glass Fiber Coupling Agent Modification

Crystallization behaviours regulations and thermostability enhancement strategy of polypropylene composites modified by dispersed rice husk charcoal

Modification on PBS using epoxy-functionalized core–shell starch particles

Spent coffee Grounds/Poly(butylene succinate) biocomposites with Robust mechanical property and heat resistance via reactive compatibilization

Recent advances in compatibility and toughness of poly(lactic acid)/poly(butylene succinate) blends

A Facile Strategy for Compatibilization of PLA/PBS Blends by Incorporating Camellia Seed Powder

Improvement of rheology and mechanical properties of PLA/PBS blends by in-situ UV-induced reactive extrusion

Toughening and Heat-Resistant Modification of Degradable PLA/PBS-Based Composites by Using Glass Fiber/Silicon Dioxide Hybrid Fillers

Super-tough polylactic acid (PLA)/poly(butylene succinate) (PBS) materials prepared through reactive blending with epoxy-functionalized PMMA-GMA copolymer

Synergistic preparation of a straw fiber/polylactic acid composite with high toughness and strength through interfacial compatibility enhancement and elastomer toughening

Copolymerization with Polyether Segments Improves the Mechanical Properties of Biodegradable Polyesters