Abstract:A new contactless bubble/slug velocity measurement method of the gas-liquid two-phase flow in small channels is proposed by extending the contactless conductivity detection technique to the contactless impedance detection (CID) technique. Two kinds of CID sensors with different constructions (tubular construction and radial construction) are developed to obtain the total impedance information (the real part, the imaginary part, and the amplitude) of the gas-liquid two-phase flow. Two bubble/slug velocity measurement systems with different constructions, the tubular three-electrode velocity measurement system and the radial four-electrode velocity measurement system, are developed. With the obtained total impedance information, three initial estimation values of the bubble/slug velocity are determined by the principle of the cross correlation velocity measurement. Then, with the real-time flow pattern identification result implemented by the fuzzy C-means, a corresponding velocity measurement model [which is the linear combination of the three initial estimation values of the bubble/slug velocity and is developed by the penalty function method and the Davidon-Fletcher-Powell algorithm] is applied to obtain the final bubble/slug velocity. Two groups of the bubble/slug velocity measurement system prototypes with three different inner diameters are developed. The bubble/slug velocity measurement experiments are carried out. The experimental results show that the proposed method is effective. For the two bubble/slug velocity measurement systems with different constructions, the maximum relative errors of the bubble/slug velocity measurement are all less than 4.5%. The research results also indicate that making full use of the total impedance information is an effective approach to improve the accuracy of the velocity measurement.

Concentration determination in a cylinder-simulated gas–solid two phase flow using ultrasonic backscattering method

Ultrasonic Simulation Research of Two-Dimensional Distribution in Gas-Solid Two-Phase Flow by Backscattering Method

Solids Volume Fraction Measurement of Gas-Solid Two-Phase Flow Based on Terahertz Time-Domain Spectroscopy Technique

Measurement of Bubble Velocity Using Capacitively Coupled Contactless Conductivity Detection (C4D) Technique

A C~4D-Based Measurement System of Gas-Liquid Two-Phase Flow

A new method for the velocity measurement of gas-liquid two-phase flow

TECHNIQUE FOR MEASURING CONCENTRATION OF GAS - SOLID TWO - PHASE FLOW INSIDE THE PIPE BASED ON ULTRASONIC METHOD

A Model-Based Transit-Time Ultrasonic Gas Flowrate Measurement Method

Measurement of Phase Holdup in Gas-Liquid-solid Three-Phase Flow Based on CCERT and Acoustic Emission

A New Contactless Bubble/Slug Velocity Measurement Method of Gas–Liquid Two-Phase Flow in Small Channels

Void Fraction Measurement Of Gas-Liquid Two-Phase Flow Based On (Cd)-D-4 Technique

Determination of Flow Regime by Analysis of Acoustic Signals from Impaction Between Particles and Distributor

A Method for Void Fraction Measurement of Bubble/slug Flow in Small Channels Based on Contactless Impedance Detection

A Novel Method for Holdup Measurement of Three Phases by an Ultrasonic Device with the Flexible Substrate

Simultaneous Measurement of Solid Concentration and Solid Moisture in Gas-solid Two-phase Flow Using a Dual-modality Electrical Sensor

A New Method for Velocity Measurement of Gas-Liquid Two-Phase Flow Based on C~4D Technique

Measurement of Bubble Velocity Based on C~4D Technique

Measurement of two phase flow concentration with a novel pressure difference method. I: Principle

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Flow rate measurement of gas-liquid annular flow through a combined multimodal ultrasonic and differential pressure sensor

Simultaneous Measurement of Elastic Moduli, Attenuation, Density, and Thickness of a Layer by Ultrasonic Spectroscopy Using Point-Focus Transducer