An Experimental Study on Fracturing Response and Slurry Flow of High-Pressure Grouting in Fractured Rock
Wenqiang Mu,Lianchong Li,Honglei Liu,Bo Ren,Jian Chen,Xin Wang
DOI: https://doi.org/10.1007/s00603-024-03785-x
IF: 6.518
2024-03-02
Rock Mechanics and Rock Engineering
Abstract:Grouting has been commonly used for structure controlling in mining engineering. To investigate the mechanism of fracturing grouting, an experiment was conducted under constant flowing conditions. Through the real-time gathering of main parameters and reconstruction of the slurry distribution, the complete grouting process and pressure spread of the high-pressure slurry were revealed. An identification method of fracturing diffusion based on acoustic emission (AE) signals was proposed and verified. The results indicated that the intact rock showed fracturing response with a mutated pressure in a short time. For fractured ones, the grouting process can be divided into five stages: seepage flow, pressure holding, fracturing diffusion, steady flow, and pressure relief. Influenced by the hydraulic fracture and slurry infiltration, there were three states: cement diffusion, water seepage, and the unaffected zone. A calculation method of whole stages for the grouting pressure was proposed based on the Hoek–Brown strength criterion and flow model in a fracture. In addition, AE ring counting occurred during the entire slurry process but was relatively concentrated in pressure holding and fracturing diffusion stages. Considering the zonal distribution characteristics, the AE method was used to characterize the slurry diffusion range and flow paths. The slurry distribution was obtained by the three-dimensional cutting and reconstruction method to verify its feasibility. This study is expected to further clarify the grouting mechanism, and guide engineering practices.
geosciences, multidisciplinary,engineering, geological