Abstract:Abstract Most controllers concerning lateral stability and rollover prevention for autonomous vehicles are designed separately and used simultaneously. However, roll motion influences lateral stability in cornering maneuvers, especially at high speed. Typical rollover prevention control stabilizes the vehicle with differential braking to create an understeering condition. Although this method can prevent rollover, it can also lead to deviation from a reference path specified for an autonomous vehicle. This contribution proposes and implements a coupled longitudinal and lateral controller for path tracking via model predictive control (MPC) to simultaneously enforce constraints on control input, state output, lateral stability, and rollover prevention. To demonstrate the approach in simulation, an 8 degrees of freedom (DOF) vehicle model is used as the MPC prediction model, and a high-fidelity 14-DOF model as the plant. The MPC-based lateral control generates a sequence of optimal steering angles, while a PID speed controller adjusts the driving or braking torque. The lateral stability envelope is determined by the phase plane of yaw rate and lateral velocity, while the roll angle threshold is derived from the load transfer ratio (LTR) and tire vertical force under the condition of quasi-steady-state rollover. To track the desired trajectory as fast as possible, a minimum-time velocity profile is determined using a forward-backward integration approach, subject to tire friction limit constraints. We demonstrate the approach in simulation, by having the vehicle track an arbitrary course of continuously varying curvature thus highlighting the accuracy of the controller and its ability to satisfy lateral and roll stability requirements. The MATLAB® code for the 8-DOF and 14-DOF vehicle models, along with the implementation of the proposed controller are available as open source in the public domain.

Trajectory-following and off-tracking minimisation of long combination vehicles: a comparison between nonlinear and linear model predictive control

Nonlinear Model Predictive Path Tracking Control for Autonomous Vehicles Based on Orthogonal Collocation Method

Path Following of Autonomous Surface Vehicles with Line-of-sight and Nonlinear Model Predictive Control

Learning-Based Hierarchical Model Predictive Control for Drift Vehicles

Nonlinear Model Predictive Control Based on Operating-Trajectory Model

Research for Nonlinear Model Predictive Controls to Laterally Control Unmanned Vehicle Trajectory Tracking

Efficient Nonlinear Model Predictive Control of Automated Vehicles

LTV-MPC Approach for Automated Vehicle Path Following at the Limit of Handling

Comparison of Linear and Nonlinear Model Predictive Control in Path Following of Underactuated Unmanned Surface Vehicles

Autonomous Wheel Loader Trajectory Tracking Control Using LPV-MPC

Practical Nonlinear Model Predictive Controller Design for Trajectory Tracking of Unmanned Vehicles

Coupled Lateral and Longitudinal Control for Trajectory Tracking, Lateral Stability, and Rollover Prevention of High-Speed Automated Vehicles Using Minimum-Time Model Predictive Control

Event-triggered nonlinear model predictive control for trajectory tracking of unmanned vehicles

Lateral Vehicle Trajectory Optimization Using Constrained Linear Time-Varying MPC

Experimental Validation of Linear and Nonlinear MPC on an Articulated Unmanned Ground Vehicle

Model predictive control with fuzzy logic switching for path tracking of autonomous vehicles

A novel nonlinear model predictive control strategy and its application to maglev ball system

Autonomous Vehicle Trajectory Following: A Flatness Model Predictive Control Approach With Hardware-in-the-Loop Verification

Robust Lateral Trajectory Following Control of Unmanned Vehicle Based on Model Predictive Control

An accurate trajectory tracking method for low-speed unmanned vehicles based on model predictive control

A novel path tracking system for autonomous vehicle based on model predictive control