Abstract:In the vast inland areas of China, more than 3 million bridges have been built to connect the remote mountainous areas and also to make up the urban transportation networks. For these bridges, reinforced concrete is the most widely adopted material in construction. Unlike the offshore bridges subjected to chloride-induced corrosion, the inland bridges have been constantly threatened by atmospheric carbonation-induced corrosion. The inland areas of China are earthquake-prone regions where several major seismic events occurred in recent years. To investigate the seismic vulnerability of inland bridges subjected to atmospheric carbonation-induced corrosion, the time-dependent characteristics of carbonation were analyzed based on an illustrative cable-stayed bridge, and the time-dependent damage states of bridge components during earthquakes were identified through the material strains of reinforcing steel and concrete. A life-cycle fragility assessment method was proposed and was used to establish the time-dependent seismic fragility curves of the illustrative cable-stayed bridge at the component and system levels. Based on the time-dependent fragility analysis, the macro identification for the seismic damage to bridge system under each damage state and its influence on traffic and repair levels were discussed, the damage sequences of bridge components for different damage states were predicted, and the application strategies of the prediction for components' damage sequences at various service periods were introduced. The research shows that the stirrups tend to be corroded first, leading to rapid decreases of the characteristic strain values of the confined core concrete; and the longitudinal reinforcement experiences very slight corrosion during the bridge's service life. The atmospheric carbonation-induced corrosion increases significantly the damage probabilities of the various bridge components, and consequently change their damage sequences at different damage states. However, the carbonation-induced corrosion does not change the CDPs (complete damage points) and MDPs (maximum damage points) of various bridge components. The bridge system is vulnerable during earthquakes and significantly affected by material degradation. Within the design service life, the damage probabilities of the bridge system can be increased by 0.5620 by the carbonation-induced corrosion, the PGAs (peak ground accelerations) corresponding to CDPs can be decreased by 0.1 g, and the MDPs of the failure state can gradually convert to the CDPs. It is possible to predict the damage sequences of the bridge components during earthquakes on the basis of seismic fragility analysis for different service periods of the bridge, based on which the corresponding maintenance and retrofit strategies can then be determined to protect the bridge against possible earthquakes, and the costs can be reduced.

Integrated framework for seismic fragility assessment of cable-stayed bridges using deep learning neural networks

Machine Learning-based Seismic Fragility Curves for RC Bridge Piers

A Deep Learning-Aided Seismic Fragility Analysis Method for Bridges

Comprehensive functional resilience assessment methodology for bridge networks using data-driven fragility models

Seismic fragility assessment of long-span cable-stayed bridges in China

A deep leaning method for dynamic vibration analysis of bridges subjected to uniform seismic excitation

Seismic Assessment of Medium-Span Concrete Cable-Stayed Bridges Using the Component and System Fragility Functions

An Artificial Neural Network Based Method for Seismic Fragility Analysis of Highway Bridges

Seismic fragility assessment of a multi-span cable-stayed bridge with tall piers

Cable-stayed Bridge Seismic Fragility Analysis

System Fragility Analysis for Cable-stayed Bridges Under Two Level Seismic Hazard

Lateral Seismic Fragility of a Cable-Stayed Bridge using Point Estimate Method

Digital twin-based collapse fragility assessment of a long-span cable-stayed bridge under strong earthquakes

Retracted: System Fragility Analysis of a Cable-Stayed Bridge Using Cable Sliding Friction Aseismic Bearings under Spatially Varying Excitations

Seismic Fragility Analysis of the Reinforced Concrete Continuous Bridge Piers Based onMachine Learning and Symbolic Regression Fusion Algorithms

Multi-parameter seismic fragility and sensitivity analysis of long-span cable-stayed bridge based on multi-task lasso regression

Life-cycle seismic damage identification and components damage sequences prediction for cable-stayed bridge based on fragility analyses

Compound Stochastic Seismic Vulnerability Analysis and Seismic Risk Evaluation for Super Large Cable-Stayed Bridge

Seismic vulnerability assessment of the rail transport capability of a long-span cable-stayed bridge

Fast seismic response estimation of tall pier bridges based on deep learning techniques

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge